switch on galley wall

Are you a new member? Stop in and say hi!
Post Reply
User avatar
Ron McLaughlin
Scurvy Dog
Scurvy Dog
Posts: 4
Joined: June 13th, 2019, 5:58 pm
Vessel Info: 1985 carver voyager 28'
Location: Sanford Florida

switch on galley wall

Post by Ron McLaughlin »

I have owned a 28' voyager for a couple of years now and am in the total restore mode of this vessel. There is a switch on the rear bulkhead wall of the galley above the fridge that I have no idea what it is for. The manual doesn't seem to address this. Can anyone assist?
User avatar
buster53
Admiral
Admiral
Posts: 1170
Joined: May 12th, 2017, 10:41 am
Vessel Info: 2001, Carver 356
Location: Gwynn’s Island, VA
Has thanked: 10 times
Been thanked: 285 times

Re: switch on galley wall

Post by buster53 »

Do you have any lights that aren't turning on? On my boat, I have a salon fan, which I never use and really don't understand why Carver installed it. Any chance you have a dead fan connected to that switch?
Could you have an engine room light?
User avatar
bud37
Admiral
Admiral
Posts: 5184
Joined: April 23rd, 2015, 10:22 pm
Has thanked: 604 times
Been thanked: 1312 times

Re: switch on galley wall

Post by bud37 »

Welcome to the forum Ron.....now we had an 83 28' a long, long time ago and it seems to me there was a switch that turned some tube lights on that were behind the valance by the drapery slides.....side windows. Now ours was the mariner with no lower station ......galley and head at the front, pull out couch and dinette at the back.

Like I said, long time ago and memory just may be a smidgeon fuzzy..... :-D
FWIW.....The above is just my opinion.
User avatar
buster53
Admiral
Admiral
Posts: 1170
Joined: May 12th, 2017, 10:41 am
Vessel Info: 2001, Carver 356
Location: Gwynn’s Island, VA
Has thanked: 10 times
Been thanked: 285 times

Re: switch on galley wall

Post by buster53 »

bud37 wrote:Welcome to the forum Ron.....now we had an 83 28' a long, long time ago and it seems to me there was a switch that turned some tube lights on that were behind the valance by the drapery slides.....side windows.D
Good call bud. If there are some out of the way fluorescent fixtures, there's a real good chance there is a switch on the fixture as well as the switch on the bulkhead. Obviously, both switches have to be turned on.
User avatar
g36
Admiral
Admiral
Posts: 2115
Joined: April 7th, 2014, 6:07 pm
Vessel Info: 1997 Carver 405
Location: Soddy Daisy TN.
Has thanked: 7 times
Been thanked: 654 times

Re: switch on galley wall

Post by g36 »

hi buster all of the 356/406 models that i have seen have the salon fan if the salon windows are not sliders like my 405 or the 355 models. the fan was there to bring in outside air since you can not slide open the large windows. i can slide open my windows for fresh air which we love to be able to do and i have no such fan installed by carver in the salon.
1997 Carver 405
Crusader xli
The Black Pearl
Soddy Daisy Tn.
User avatar
Ron McLaughlin
Scurvy Dog
Scurvy Dog
Posts: 4
Joined: June 13th, 2019, 5:58 pm
Vessel Info: 1985 carver voyager 28'
Location: Sanford Florida

Re: switch on galley wall

Post by Ron McLaughlin »

buster53 wrote:QR_BBPOST Do you have any lights that aren't turning on? On my boat, I have a salon fan, which I never use and really don't understand why Carver installed it. Any chance you have a dead fan connected to that switch?
Could you have an engine room light?
Thank you. I have sliding windows down both sides so I won't have a salon fan, but I haven't checked the engine room for a light yet. Will check next time I go out.
User avatar
Ron McLaughlin
Scurvy Dog
Scurvy Dog
Posts: 4
Joined: June 13th, 2019, 5:58 pm
Vessel Info: 1985 carver voyager 28'
Location: Sanford Florida

Re: switch on galley wall

Post by Ron McLaughlin »

bud37 wrote:QR_BBPOST Welcome to the forum Ron.....now we had an 83 28' a long, long time ago and it seems to me there was a switch that turned some tube lights on that were behind the valance by the drapery slides.....side windows. Now ours was the mariner with no lower station ......galley and head at the front, pull out couch and dinette at the back.

Like I said, long time ago and memory just may be a smidgeon fuzzy..... :-D
Thanks, there are no tube lights behind the valance, but you made me think of something. I have always turned the salon lights on by the main panel only. I might be able to leave the breaker on and turn the lights off by that switch. I will try that the next time I go out.
User avatar
Ron McLaughlin
Scurvy Dog
Scurvy Dog
Posts: 4
Joined: June 13th, 2019, 5:58 pm
Vessel Info: 1985 carver voyager 28'
Location: Sanford Florida

Re: switch on galley wall

Post by Ron McLaughlin »

g36 wrote:QR_BBPOST hi buster all of the 356/406 models that i have seen have the salon fan if the salon windows are not sliders like my 405 or the 355 models. the fan was there to bring in outside air since you can not slide open the large windows. i can slide open my windows for fresh air which we love to be able to do and i have no such fan installed by carver in the salon.
Thank you for the post. I have sliding windows down both sides so there is no fan, but I am going to test the switch with the salon lights. I have always turned them on by the main panel only. I will try this next time i'm out.
User avatar
buster53
Admiral
Admiral
Posts: 1170
Joined: May 12th, 2017, 10:41 am
Vessel Info: 2001, Carver 356
Location: Gwynn’s Island, VA
Has thanked: 10 times
Been thanked: 285 times

Re: switch on galley wall

Post by buster53 »

You shouldn't have to turn on any lights at the panel.
Post Reply