Boat listing to port
-
trmnewt
- Scurvy Dog
- Posts: 10
- Joined: May 10th, 2013, 7:25 pm
- Vessel Info: 2000 Carver 506
- Been thanked: 1 time
Re: Boat listing to port
Hey thanks! Do you know if there are more than one? My old 355 Aft Cabin had 2--one for each head
-
Lyndon670
- Admiral
- Posts: 657
- Joined: July 29th, 2013, 11:35 pm
- Vessel Info: 2000 Carver 506
Volvo TAMD74EDC - Location: Georgian Bay
- Has thanked: 124 times
- Been thanked: 140 times
Re: Boat listing to port
At this point, I'm going to say one big one - but that's only because I haven't crawled forward enough yet. Judging by the size of the one, and the sounds made if you run the galley and forward head taps.
Lyndon,
2000 Carver 506
FOXY JOE
Volvo 7.4TAMD
Queens Cove Marina
Georgian Bay, Ontario
2000 Carver 506
FOXY JOE
Volvo 7.4TAMD
Queens Cove Marina
Georgian Bay, Ontario
-
Lyndon670
- Admiral
- Posts: 657
- Joined: July 29th, 2013, 11:35 pm
- Vessel Info: 2000 Carver 506
Volvo TAMD74EDC - Location: Georgian Bay
- Has thanked: 124 times
- Been thanked: 140 times
Re: Boat listing to port
I just made my way to the front of the boat in the engine room. There is a front sump as well, in front of the front bilge pump - which is in front of the genset by the water manifold. Both front heads and the galley drain to it. Everything else goes to the one below the master bed.
Lyndon,
2000 Carver 506
FOXY JOE
Volvo 7.4TAMD
Queens Cove Marina
Georgian Bay, Ontario
2000 Carver 506
FOXY JOE
Volvo 7.4TAMD
Queens Cove Marina
Georgian Bay, Ontario
Sponsors