370 voyager or 37 to 38 aft
- bud37
- Admiral

- Posts: 5182
- Joined: April 23rd, 2015, 10:22 pm
- Has thanked: 604 times
- Been thanked: 1312 times
Re: 370 voyager or 37 to 38 aft
Hi again...well we have looked at some boats....the 370 voyager we really like the layout,moisture meter showed the regular issues, deck fittings. windlass etc....one thing ,vague head odor,can that tank be removed easily ??How about the fuel tanks?? Surprising lack of keel on this boat.
Ramsport you were right on about the stairs on the afts, we did not like the climb from the platform up at all,..inside and bridge was ok though, but we would like to be able to see out from the dinette.
Mike
Ramsport you were right on about the stairs on the afts, we did not like the climb from the platform up at all,..inside and bridge was ok though, but we would like to be able to see out from the dinette.
Mike
FWIW.....The above is just my opinion.
- bud37
- Admiral

- Posts: 5182
- Joined: April 23rd, 2015, 10:22 pm
- Has thanked: 604 times
- Been thanked: 1312 times
Re: 370 voyager or 37 to 38 aft
Well the process continues..the 390 aft with the cockpit...so we have a new contender that seems to address the ladder issue and we get our transom door......anything to look for here, going to crawl around one soon....Mike
FWIW.....The above is just my opinion.
- Lyndon670
- Admiral

- Posts: 657
- Joined: July 29th, 2013, 11:35 pm
- Vessel Info: 2000 Carver 506
Volvo TAMD74EDC - Location: Georgian Bay
- Has thanked: 124 times
- Been thanked: 140 times
Re: 370 voyager or 37 to 38 aft
Mike, almost none of the Carver line (actually I can't think of one) have a keel. If you are looking at the 390 cockpit, also look at the 430 cockpit. Same design, just bigger.
Lyndon,
2000 Carver 506
FOXY JOE
Volvo 7.4TAMD
Queens Cove Marina
Georgian Bay, Ontario
2000 Carver 506
FOXY JOE
Volvo 7.4TAMD
Queens Cove Marina
Georgian Bay, Ontario
- Ramsport47
- Commander

- Posts: 376
- Joined: February 10th, 2013, 7:13 am
- Vessel Info: 1998 Carver 310 Santego
- Has thanked: 72 times
- Been thanked: 59 times
Re: 370 voyager or 37 to 38 aft
Actually, the 430 has a keel. It is a 38 Aft Cabin with a cockpit grafted on, whereas the 390/400/404 cockpits are 355/356 with a cockpit grafted on. The 430 is a 14 foot beam and is a much older and less efficient design both in packaging and functionality. Don't get me wrong, it's a great boat, just an old design.
Kenny
1998 Carver 310 Santego
T-Merc 350 Mag MPI (300hp)
Port: Cedar Point Marina, Sandusky, Ohio
1998 Carver 310 Santego
T-Merc 350 Mag MPI (300hp)
Port: Cedar Point Marina, Sandusky, Ohio
- bud37
- Admiral

- Posts: 5182
- Joined: April 23rd, 2015, 10:22 pm
- Has thanked: 604 times
- Been thanked: 1312 times
Re: 370 voyager or 37 to 38 aft
Good morning guys.....well we inspected a 390, nice boat overall but before I go any further, maybe Ramsport could you answer a question I have....this boat has a 3 to 4" list to port side....is this normal....water tank was apparently just filled, but just seems a little much....
Friends of ours have a 38 aft and I did notice there is a keel and more deadrise .....MIke
Friends of ours have a 38 aft and I did notice there is a keel and more deadrise .....MIke
FWIW.....The above is just my opinion.
- Lyndon670
- Admiral

- Posts: 657
- Joined: July 29th, 2013, 11:35 pm
- Vessel Info: 2000 Carver 506
Volvo TAMD74EDC - Location: Georgian Bay
- Has thanked: 124 times
- Been thanked: 140 times
Re: 370 voyager or 37 to 38 aft
Mike, where are you located? There is one in my marina (430) with low hour Cummins, been for sale since 2011, owner is a 2 boat owner....
Lyndon,
2000 Carver 506
FOXY JOE
Volvo 7.4TAMD
Queens Cove Marina
Georgian Bay, Ontario
2000 Carver 506
FOXY JOE
Volvo 7.4TAMD
Queens Cove Marina
Georgian Bay, Ontario
- Ramsport47
- Commander

- Posts: 376
- Joined: February 10th, 2013, 7:13 am
- Vessel Info: 1998 Carver 310 Santego
- Has thanked: 72 times
- Been thanked: 59 times
Re: 370 voyager or 37 to 38 aft
A slight list would be considered normal. A 3 to 4" list is excessive. I would look to the fuel being unbalanced in the side tanks. The water tanks are typically centered, or close to it, or balanced with a crossover hose from side to side. I think more research into why is needed.
Kenny
1998 Carver 310 Santego
T-Merc 350 Mag MPI (300hp)
Port: Cedar Point Marina, Sandusky, Ohio
1998 Carver 310 Santego
T-Merc 350 Mag MPI (300hp)
Port: Cedar Point Marina, Sandusky, Ohio
- bud37
- Admiral

- Posts: 5182
- Joined: April 23rd, 2015, 10:22 pm
- Has thanked: 604 times
- Been thanked: 1312 times
Re: 370 voyager or 37 to 38 aft
Lyndon670 wrote:Mike, where are you located? There is one in my marina (430) with low hour Cummins, been for sale since 2011, owner is a 2 boat owner....
Midland area.....I have seen the ads for that boat, I wonder why it has not sold ????
Thanks Kenny....where would a guy see some schematics of tank locations for these boats, are they even out there to see ?....Mike
FWIW.....The above is just my opinion.
- Ramsport47
- Commander

- Posts: 376
- Joined: February 10th, 2013, 7:13 am
- Vessel Info: 1998 Carver 310 Santego
- Has thanked: 72 times
- Been thanked: 59 times
Re: 370 voyager or 37 to 38 aft
bud37 wrote:Lyndon670 wrote:Mike, where are you located? There is one in my marina (430) with low hour Cummins, been for sale since 2011, owner is a 2 boat owner....
Midland area.....I have seen the ads for that boat, I wonder why it has not sold ????
Thanks Kenny....where would a guy see some schematics of tank locations for these boats, are they even out there to see ?....Mike
The 390/400/404 Cockpit Motor Yachts have 3 fuel tanks. Two are saddle tanks outboard of each engine and the third is an auxiliary tank located under the cockpit floor. There are fuel selector valves to operate each engine from the tank on it's side of the boat, or the aux tank located in front of the port engine. If you have the owners manual, the info should be in there with schematics
Kenny
1998 Carver 310 Santego
T-Merc 350 Mag MPI (300hp)
Port: Cedar Point Marina, Sandusky, Ohio
1998 Carver 310 Santego
T-Merc 350 Mag MPI (300hp)
Port: Cedar Point Marina, Sandusky, Ohio
- Lyndon670
- Admiral

- Posts: 657
- Joined: July 29th, 2013, 11:35 pm
- Vessel Info: 2000 Carver 506
Volvo TAMD74EDC - Location: Georgian Bay
- Has thanked: 124 times
- Been thanked: 140 times
Re: 370 voyager or 37 to 38 aft
Mike, email me at sales@lyndongreene.ca and I'll give you the scoop. Nothing wrong with the boat, it's the owner.
Lyndon,
2000 Carver 506
FOXY JOE
Volvo 7.4TAMD
Queens Cove Marina
Georgian Bay, Ontario
2000 Carver 506
FOXY JOE
Volvo 7.4TAMD
Queens Cove Marina
Georgian Bay, Ontario