Don't Have to pretend anymore

ImageThis forum is for general discussion of all things Boating. If it's boating related and doesn't fit in another forum, post it here!
Post Reply
User avatar
Jangocat
Scurvy Dog
Scurvy Dog
Posts: 46
Joined: April 3rd, 2015, 10:39 am
Vessel Info: 1975 28' Carver Santa Cruz, Flybridge,twin 302 Waukasha inboards, shaft drive
Been thanked: 9 times

Don't Have to pretend anymore

Post by Jangocat »

Well we no longer have to pretend. Put the boat in the water yesterday for a shake down. All the systems worked except the toilet would not suck flushing water in. That's just minor. Think that the previous owner left a repair kit on board. The Port engine is still trying to get me. the ignition switch stuck a little but seems to have straightened up. I thought that we might have trouble launching but with my 18" extended stinger it floated off and upon retrieval I used my 32" extend stinger and we just floated it on which made the Admiral very happy since she didn't have to try and drive it on. Now it's mostly putting shelves in the bilge areas for storage, sliding doors across the deck access and working on the trim tabs and tweaking the trailer. Also need to replace the fuel pump in our 5hp Nissan outboard. A fairly uneventful trip except for the boat in the slip next to us sinking. The last picture is the boat that sank next to us.
You do not have the required permissions to view the files attached to this post.
User avatar
g36
Admiral
Admiral
Posts: 2115
Joined: April 7th, 2014, 6:07 pm
Vessel Info: 1997 Carver 405
Location: Soddy Daisy TN.
Has thanked: 7 times
Been thanked: 654 times

Re: Don't Have to pretend anymore

Post by g36 »

Very nice pics except that last one. Looks like a nice area for boating.
1997 Carver 405
Crusader xli
The Black Pearl
Soddy Daisy Tn.
User avatar
Jangocat
Scurvy Dog
Scurvy Dog
Posts: 46
Joined: April 3rd, 2015, 10:39 am
Vessel Info: 1975 28' Carver Santa Cruz, Flybridge,twin 302 Waukasha inboards, shaft drive
Been thanked: 9 times

Re: Don't Have to pretend anymore

Post by Jangocat »

It's a local reservoir on the Snake River run by Idaho Power Company. About a two hour drive over freeway and good secondary roads. there's another reservoir about 30 minutes away but it tends to get crowed and we wanted calm for our first put in after 5 years of projects. Got a good ramp and isn't too crowded during the week. Jim
Viper
CYO Supporter
CYO Supporter
Posts: 6266
Joined: July 10th, 2015, 9:58 pm
Vessel Info: 1989 Carver 3807 Aft Cabin
Location: Ontario, Canada
Has thanked: 475 times
Been thanked: 1791 times

Re: Don't Have to pretend anymore

Post by Viper »

She looks better in the water :down:
User avatar
km1125
Admiral
Admiral
Posts: 3657
Joined: February 28th, 2017, 6:04 pm
Has thanked: 81 times
Been thanked: 1114 times

Re: Don't Have to pretend anymore

Post by km1125 »

Nice pictures (yes, except for the last one!). Looks like a great relaxing place!!

On that 5hp motor, if it's the 4 stroke you can take those fuel pumps apart and clean then easily. You can also flip over the plastic 'valves' inside for a fresh surface and usually they work like new for quite a while.
User avatar
Jangocat
Scurvy Dog
Scurvy Dog
Posts: 46
Joined: April 3rd, 2015, 10:39 am
Vessel Info: 1975 28' Carver Santa Cruz, Flybridge,twin 302 Waukasha inboards, shaft drive
Been thanked: 9 times

Re: Don't Have to pretend anymore

Post by Jangocat »

I've got a new one coming was $28 I couldn't buy a rebuild kit for that. I'll try your fix and keep one as a spare. Thanks, Jim
User avatar
RGrew176
Admiral
Admiral
Posts: 6652
Joined: August 17th, 2015, 4:07 am
Vessel Info: 2023 SunTracker Party Barge 22 DLX
Location: Southgate, MI.
Has thanked: 72 times
Been thanked: 470 times

Re: Don't Have to pretend anymore

Post by RGrew176 »

Nice photos. Thanks for sharing. Hope there is a happy ending to the boat that sank.
Rick Grew

2025 Godfrey Xperience 2286 SFLX

2004 Past Commodore
West River Yacht & Cruising Club
Post Reply