Hi,
I am looking at a Carver 1989 38 aft boat, anything special I should be wary of?
thanks
Mpw
1989 Carver 38 aft
-
Viper
- CYO Supporter

- Posts: 6266
- Joined: July 10th, 2015, 9:58 pm
- Vessel Info: 1989 Carver 3807 Aft Cabin
- Location: Ontario, Canada
- Has thanked: 475 times
- Been thanked: 1791 times
Re: 1989 Carver 38 aft
Welcome aboard. Posting the model might help the guys reply specific to the model. I have an '89 3807 aft cabin which I suspect is what you're talking about. Great boat, very roomy. No red flags specific to this model that I'm aware of. Of coarse the usual applies as would with any brand of boat such as checking for soft decks, swim platform, etc. Structurally, the advantage with these Carvers compared to other brands is there is no wood below the water line, so no wooden core, stringers, etc. They're well built with nice wood work and workmanship. It's a big boat for gas engines, diesels would be ideal but really depends on your boating habits. Get a survey so you're aware of any deficiencies that need addressing soon, you'll need one for the marina and insurance anyway.
Good luck and keep us posted.
Good luck and keep us posted.
- buster53
- Admiral

- Posts: 1170
- Joined: May 12th, 2017, 10:41 am
- Vessel Info: 2001, Carver 356
- Location: Gwynn’s Island, VA
- Has thanked: 10 times
- Been thanked: 285 times
Re: 1989 Carver 38 aft
Sounds like a 3807 and probably 7.4 gassers. Very thirsty engines. When we had one, we did almost all of our cruising at hull speed, around 7-7.5 knots. Doubled our range and mpg's.
- g36
- Admiral

- Posts: 2115
- Joined: April 7th, 2014, 6:07 pm
- Vessel Info: 1997 Carver 405
- Location: Soddy Daisy TN.
- Has thanked: 7 times
- Been thanked: 654 times
Re: 1989 Carver 38 aft
good luck and welcome
1997 Carver 405
Crusader xli
The Black Pearl
Soddy Daisy Tn.
Crusader xli
The Black Pearl
Soddy Daisy Tn.
- VicB
- Deck Hand

- Posts: 88
- Joined: October 12th, 2018, 2:18 pm
- Vessel Info: 1988 Carver 3807
- Location: Alabama
- Has thanked: 41 times
- Been thanked: 11 times
Re: 1989 Carver 38 aft
To echo what buster said, I have an 88’ 3807 with 7.4s. At wide open throttle the floscan said the fuel burn was 26 gallons an hour per engine. Obviously, you’d never run like that. At 10 - 12 knots, it’s around 10 gph. For such a large and comfortable boat, you just get used to it. I love my boat and couldn’t imagine anything larger or smaller. It’s perfect for my family. Good luck!!
- buster53
- Admiral

- Posts: 1170
- Joined: May 12th, 2017, 10:41 am
- Vessel Info: 2001, Carver 356
- Location: Gwynn’s Island, VA
- Has thanked: 10 times
- Been thanked: 285 times
Re: 1989 Carver 38 aft
VicB wrote:Qr Bbpost To echo what buster said, I have an 88’ 3807 with 7.4s. At wide open throttle the floscan said the fuel burn was 26 gallons an hour per engine. Obviously, you’d never run like that. At 10 - 12 knots, it’s around 10 gph. For such a large and comfortable boat, you just get used to it. I love my boat and couldn’t imagine anything larger or smaller. It’s perfect for my family. Good luck!!
Convert those numbers into MPG and see what you get. 10-12 knots is a very inefficient speed. Anything between hull speed and full plane is a big waste of gas.
