3607 over the road height

The is the forum to discuss general information regarding all Carver Yachts.
Post Reply
User avatar
phatboat
Scurvy Dog
Scurvy Dog
Posts: 6
Joined: September 20th, 2020, 4:14 am
Vessel Info: 1985 3607
Location: Maine

3607 over the road height

Post by phatboat »

Can anybody tell me the actual height of a 1985 3607 for the purpose of having it hauled down the road? I assume will need to lower the "roll bar" so from flybridge to bottom of the hull. :captain:
User avatar
waybomb
CYO Moderator
CYO Moderator
Posts: 2745
Joined: February 5th, 2013, 9:24 pm
Vessel Info: 1995 Boston Whaler Rage15
1987 3697 Carver Mariner
1988 Cougar 46 Kevlar Vee offshore
1969 15' Glasspar / 1967 Johnson Electromatic 85
Location: Saint Joseph,Mi
Has thanked: 69 times
Been thanked: 492 times

Re: 3607 over the road height

Post by waybomb »

Have a 3697. The arch, the windshield, the rear chair, the steering wheel all had to come off.

The 4207 had to have the entire bridge taken off to the cabin roof/bridge floor.
Thanks
Fred
1969 Glaspar Avalon /1967 Johnson Electromatic 85
1987 Carver Mariner
1988 Cougar Kevlar 46' with triple blown 572 ci
1995 Boston Whaler Rage
Past - 1988 2807, 1989 4207 Aft
User avatar
denders
Deck Hand
Deck Hand
Posts: 78
Joined: August 24th, 2015, 6:21 pm
Vessel Info: 1985 Carver 3607 Aft Cabin
Has thanked: 2 times
Been thanked: 24 times

Re: 3607 over the road height

Post by denders »

I will be measuring mine next weekend - not sure if that helps. The specs say Brdige clearance of 11 ft 9 inches , plus a 3 ft 2 inch draft - gives just a shade under 15 feet. I may be misinterpeting the specs though

http://cdn.denisonyachtsales.com/boat-g ... 0Cabin.pdf

We will be moving ours in the spring and have been told 14 feet loaded is as high as we can go.
Post Reply