1996 370 Voyager

The is the forum to discuss general information regarding all Carver Yachts.
Post Reply
User avatar
Dewmyster
Deck Hand
Deck Hand
Posts: 89
Joined: September 2nd, 2015, 7:43 pm
Vessel Info: 1998 370 Voyager
Location: North of Gosnold
Has thanked: 9 times
Been thanked: 12 times

1996 370 Voyager

Post by Dewmyster »

Hello All, I am looking at this vessel and can't seem to find out accurate information on the following:

Favorable cruising speed with 7.4 MPI Merc's.

Fuel burn at cruising speed.

I really like the looks and layout of this boat and would like this info before committing.

Thank you
Last edited by Dewmyster on September 3rd, 2015, 7:55 pm, edited 1 time in total.
:usa:
User avatar
Lyndon670
Admiral
Admiral
Posts: 657
Joined: July 29th, 2013, 11:35 pm
Vessel Info: 2000 Carver 506
Volvo TAMD74EDC
Location: Georgian Bay
Has thanked: 124 times
Been thanked: 140 times

Re: 1996 370 Voyager

Post by Lyndon670 »

I cant say for certain and am basing my information on my 8.1HOs from my previous boat (Silverton 41C) which was bigger - but I would suggest favorable speed somewhere around 15kts and your fuel burn will be north of 30GPH.

Hull speed will be your most economical.
Lyndon,
2000 Carver 506
FOXY JOE
Volvo 7.4TAMD
Queens Cove Marina
Georgian Bay, Ontario
User avatar
Ramsport47
Commander
Commander
Posts: 376
Joined: February 10th, 2013, 7:13 am
Vessel Info: 1998 Carver 310 Santego
Has thanked: 72 times
Been thanked: 59 times

Re: 1996 370 Voyager

Post by Ramsport47 »

I don't remember too clearly, but, cruising speed should be in the 20 to 22 MPH range with fuel burn in the upper 20's to lower 30s per hour. The hull on the Voyager is pretty efficient...same hull that is under the 355/356 aft cabins, but less weight
Kenny
1998 Carver 310 Santego
T-Merc 350 Mag MPI (300hp)
Port: Cedar Point Marina, Sandusky, Ohio
Post Reply