1993 370 Voyager Prop Sizes

Tim Sperryn · Post by **Tim Sperryn** » April 2nd, 2021, 8:38 am

Hi all
I’ve bought a boat that’s been under-propped!
Anyone know where I can find the prop specs for a 370 Voyager with Cummins 300’s?
(I am unable to e-mail Carver from the UK!!!)
Thanks
Desperate Tim

Cooler · Post by **Cooler** » April 2nd, 2021, 10:43 am

Tim, respond to this post with your hull I.D. number. I will contact Carver and see what size props were provided when the boat was shipped from the facility. If you are not comfortable publishing that number here, then PM me. Good Luck.

er

Tim Sperryn · Post by **Tim Sperryn** » April 7th, 2021, 10:30 am

You are a star!

HIN: CDRU9022J293

Twin Cummins 300’s...

Thanks so much for this, their ‘dealer’ in the UK is unresponsive as well...

Tim

Cooler · Post by **Cooler** » April 8th, 2021, 10:58 am

Just talked to Carver. They are looking up the build log. Should have the info a little later.

er

Cooler · Post by **Cooler** » April 8th, 2021, 11:52 am

OK, here it is. Original props were 18 X 18. Shaft is 1 3/8" The props were from Michigan Wheel. Part numbers are 350225 for the left turn, and 350224 for the right turn. If you want to contact Michigan Wheel, their US phone number is 800-369-4335.

Hope that helps.

er

Tim Sperryn · Post by **Tim Sperryn** » April 12th, 2021, 9:11 am

Sorry Cooler, I couldn’t access this site for a week (i live in medieval UK!).
Thank you very much for the info and the contact details, I’ve gone from the ‘dark’ to dimly lit, a major improvement!!! Tim

1993 370 Voyager Prop Sizes

1993 370 Voyager Prop Sizes

Re: 1993 370 Voyager Prop Sizes

Re: 1993 370 Voyager Prop Sizes

Re: 1993 370 Voyager Prop Sizes

Re: 1993 370 Voyager Prop Sizes

Re: 1993 370 Voyager Prop Sizes