I have a intermittent jumpy oil pressure gauge on my port side. I have checked the connection at the back on the gauge and every thing is tight. I would like to know where the other end is connected
2001 350 Mariner with 350 MAG MPI.
Thanks
Fraser
Oil Pressure Sensor
-
waybomb
- CYO Moderator
- Posts: 2745
- Joined: February 5th, 2013, 9:24 pm
- Vessel Info: 1995 Boston Whaler Rage15
1987 3697 Carver Mariner
1988 Cougar 46 Kevlar Vee offshore
1969 15' Glasspar / 1967 Johnson Electromatic 85 - Location: Saint Joseph,Mi
- Has thanked: 69 times
- Been thanked: 492 times
Re: Oil Pressure Sensor
I think there is at least one connector between the gauge and the engine harness. This would be a large connector with many wires.
I am guessing the actual sender is somewhere down near the oil filer adapter is on the engine. This should be two wires.
I am guessing the actual sender is somewhere down near the oil filer adapter is on the engine. This should be two wires.
Thanks
Fred
1969 Glaspar Avalon /1967 Johnson Electromatic 85
1987 Carver Mariner
1988 Cougar Kevlar 46' with triple blown 572 ci
1995 Boston Whaler Rage
Past - 1988 2807, 1989 4207 Aft
Fred
1969 Glaspar Avalon /1967 Johnson Electromatic 85
1987 Carver Mariner
1988 Cougar Kevlar 46' with triple blown 572 ci
1995 Boston Whaler Rage
Past - 1988 2807, 1989 4207 Aft
Sponsors