Looking at a 2006 Carver 46MY, very clean, one owner, Volvo 480/75P EDC 1600 hrs
Boat is fresh water, Beacon Bay Marina, lots of hours on this yacht, should I be concerned about this?
Boat buying advise
-
Makin Waves
- Deck Hand

- Posts: 73
- Joined: May 18th, 2014, 8:57 am
- Vessel Info: 2006 Carver 46MY
- Been thanked: 8 times
- CYO Admin
- CYO Administrator

- Posts: 427
- Joined: January 30th, 2013, 9:07 am
- Location: Florida
- Has thanked: 269 times
- Been thanked: 29 times
Re: Boat buying advise
1600 hours is nothing for those engines, even for an 06. I would be more concerned if there were 200 hours.
- feeez
- Commander

- Posts: 421
- Joined: May 14th, 2014, 6:32 am
- Vessel Info: 2001 350 Mariner
- Location: Beacon Bay Penetanguishine Ontario
- Has thanked: 52 times
- Been thanked: 66 times
Re: Boat buying advise
If I may. I know this boat. The owner is a straight shooter. Well looked after and well equipped.
and no I am not unfortunately the owner!!!
Cheers
Fraser
and no I am not unfortunately the owner!!!
Cheers
Fraser
Former 2001 350 Mariner owner
-
Makin Waves
- Deck Hand

- Posts: 73
- Joined: May 18th, 2014, 8:57 am
- Vessel Info: 2006 Carver 46MY
- Been thanked: 8 times
Re: Boat buying advise
Hi Fraser, thanks for the info, hope you remember me, I owned your Mariner in Whitby, how was your summer? We are looking at Kadadi, might try to make a deal
Dave
Dave
- feeez
- Commander

- Posts: 421
- Joined: May 14th, 2014, 6:32 am
- Vessel Info: 2001 350 Mariner
- Location: Beacon Bay Penetanguishine Ontario
- Has thanked: 52 times
- Been thanked: 66 times
Re: Boat buying advise
Summer was great. Good to hear from you again Dave. But it appears that it did not take very long for Footitis to set in again for you. All the best in you dealings for Kadadi if you go ahead.
Cheers
Fraser
Cheers
Fraser
Former 2001 350 Mariner owner
- Lyndon670
- Admiral

- Posts: 657
- Joined: July 29th, 2013, 11:35 pm
- Vessel Info: 2000 Carver 506
Volvo TAMD74EDC - Location: Georgian Bay
- Has thanked: 124 times
- Been thanked: 140 times
Re: Boat buying advise
Hey Fraser, did I see you stern tied into to a little spot just south of little Beckwith back in August?
Lyndon,
2000 Carver 506
FOXY JOE
Volvo 7.4TAMD
Queens Cove Marina
Georgian Bay, Ontario
2000 Carver 506
FOXY JOE
Volvo 7.4TAMD
Queens Cove Marina
Georgian Bay, Ontario
- feeez
- Commander

- Posts: 421
- Joined: May 14th, 2014, 6:32 am
- Vessel Info: 2001 350 Mariner
- Location: Beacon Bay Penetanguishine Ontario
- Has thanked: 52 times
- Been thanked: 66 times
Re: Boat buying advise
It wasn't me this time Lyndon but we were out at Beckwith in August with some friends for the afternoon.
BTW.... you should post some shots of your underwater light project the little pic looks awesome.
Cheers
Fraser
BTW.... you should post some shots of your underwater light project the little pic looks awesome.
Cheers
Fraser
Former 2001 350 Mariner owner
-
Viper
- CYO Supporter

- Posts: 6266
- Joined: July 10th, 2015, 9:58 pm
- Vessel Info: 1989 Carver 3807 Aft Cabin
- Location: Ontario, Canada
- Has thanked: 475 times
- Been thanked: 1791 times
Re: Boat buying advise
Makin Waves wrote:.....1600 hrs....should I be concerned about this?
I wouldn't worry so much about hours as much as how she was run and maintained. A well maintained 3000 hour engine could outlast a 1000 hour engine that has had the s%^t kicked out of her and poorly maintained.
- Lyndon670
- Admiral

- Posts: 657
- Joined: July 29th, 2013, 11:35 pm
- Vessel Info: 2000 Carver 506
Volvo TAMD74EDC - Location: Georgian Bay
- Has thanked: 124 times
- Been thanked: 140 times
Re: Boat buying advise
I will create a post with some pics once I get my boat hauled Fraser. I get comments where ever I go with the boat. I also did 2 other boats in the marina last winter and have 3 to do this winter.
Lyndon,
2000 Carver 506
FOXY JOE
Volvo 7.4TAMD
Queens Cove Marina
Georgian Bay, Ontario
2000 Carver 506
FOXY JOE
Volvo 7.4TAMD
Queens Cove Marina
Georgian Bay, Ontario
