Carver 356 Generator Issue

The is the forum to discuss general information regarding all Carver Yachts.
Post Reply
User avatar
wpurves
Scurvy Dog
Scurvy Dog
Posts: 1
Joined: May 26th, 2021, 6:58 pm
Vessel Info: 2002 Carver 356
Location: Sandusky, OH

Carver 356 Generator Issue

Post by wpurves »

I'm a new owner of a Carver 356. Just had the impeller on the generator replaced. Took the boat out. While under way the generator impeller malfunctioned. Mechanic said that the generator should not be used while on plane. Is that correct?
CaptDenny
Scurvy Dog
Scurvy Dog
Posts: 18
Joined: May 18th, 2021, 4:23 pm
Vessel Info: 1998 Carver 405
Location: Florida
Has thanked: 7 times
Been thanked: 2 times

Re: Carver 356 Generator Issue

Post by CaptDenny »

REALLY? On plane?
I guess it would depend on where the water intake is located for the generator .
Never heard of that as an issue in all my years.
How fast are you going that the bottom of the boat is out of the water? And if you are skimming the surface I would think just the bouncing back onto the surface would give enough flow to keep the impeller functioning.
User avatar
buster53
Admiral
Admiral
Posts: 1170
Joined: May 12th, 2017, 10:41 am
Vessel Info: 2001, Carver 356
Location: Gwynn’s Island, VA
Has thanked: 10 times
Been thanked: 285 times

Re: Carver 356 Generator Issue

Post by buster53 »

When you say it malfunctioned, exactly what happened?
Many people run their gensets while on plane.
Viper
CYO Supporter
CYO Supporter
Posts: 6266
Joined: July 10th, 2015, 9:58 pm
Vessel Info: 1989 Carver 3807 Aft Cabin
Location: Ontario, Canada
Has thanked: 475 times
Been thanked: 1791 times

Re: Carver 356 Generator Issue

Post by Viper »

Not saying one way or the other that the tech is correct or wrong as we don't have all the facts but you can get away with it in some designs and not others. There's a few factors that will determine whether you can operate the generator while under way under certain conditions; the hull design, the placement of the intake, the type of intake fitting, pump efficiency, and hull speed. Sometimes conditions will cause a vacuum at the intake and pull water out of it instead of allowing it in.
User avatar
tomschauer
Admiral
Admiral
Posts: 2323
Joined: March 28th, 2016, 10:52 pm
Vessel Info: 1998 Carver 355
Suspicious Fishes !
2022 Kawasaki 310X
Location: upper chesapeake bay
Has thanked: 326 times
Been thanked: 602 times

Re: Carver 356 Generator Issue

Post by tomschauer »

I don't run mine often, but I have ran it while on plane several times with no issues.
User avatar
km1125
Admiral
Admiral
Posts: 3657
Joined: February 28th, 2017, 6:04 pm
Has thanked: 81 times
Been thanked: 1114 times

Re: Carver 356 Generator Issue

Post by km1125 »

I had a friend with a 356 and he ran the generator ALL THE TIME when he was cruising. His older generator failed from 'lack of use' and he was determined to not let the same fate befall the one on the 356. Plus, he had an air conditioned cabin that was already down to temperature when they got to where they were going to drop the hook.

If you were in a go-fast boat that was out of the water half the time I might say differently, but in a 356 you shouldn't have a problem at all.
Post Reply