Shower sump

Post Reply
User avatar
jsurfwhite
Scurvy Dog
Scurvy Dog
Posts: 28
Joined: June 15th, 2020, 4:12 pm
Vessel Info: 2000 Carver 356 Aft Deck
Location: Florida
Has thanked: 12 times
Been thanked: 4 times

Shower sump

Post by jsurfwhite »

My forward shower sump has failed on my 2000 356 Aft Cabin. What are recommendations on replacement? I see an Atwood sump box on Amazon that may work. Thanks
User avatar
g36
Admiral
Admiral
Posts: 2115
Joined: April 7th, 2014, 6:07 pm
Vessel Info: 1997 Carver 405
Location: Soddy Daisy TN.
Has thanked: 7 times
Been thanked: 654 times

Re: Shower sump

Post by g36 »

Whats meant by failed? Float switch ? or you could take the pump out and check the bottom of it for hair etc that can get wrapped around the shaft. You could just replace the switch or pump that's in the sump now . Good chance it's a small rule pump.
1997 Carver 405
Crusader xli
The Black Pearl
Soddy Daisy Tn.
User avatar
jsurfwhite
Scurvy Dog
Scurvy Dog
Posts: 28
Joined: June 15th, 2020, 4:12 pm
Vessel Info: 2000 Carver 356 Aft Deck
Location: Florida
Has thanked: 12 times
Been thanked: 4 times

Re: Shower sump

Post by jsurfwhite »

Pump is not coming on. Could be pump or switch. I have not investigated failure mode yet. One of my boating associates recommended a full sump replacement.
User avatar
g36
Admiral
Admiral
Posts: 2115
Joined: April 7th, 2014, 6:07 pm
Vessel Info: 1997 Carver 405
Location: Soddy Daisy TN.
Has thanked: 7 times
Been thanked: 654 times

Re: Shower sump

Post by g36 »

I would then check for sump breaker tripped. If it is Then pull pump and check for hair at bottom of pump this can cause pump breaker to trip. And test float if not pump.. my sump breakers are under step coming in from sun deck not sure if yours on 356 is same.. You can replace the whole box but save some money and replace only whats needed. Imo.
1997 Carver 405
Crusader xli
The Black Pearl
Soddy Daisy Tn.
User avatar
Cooler
Admiral
Admiral
Posts: 1685
Joined: May 22nd, 2018, 12:09 pm
Vessel Info: 1995 Carver 330 Mariner
Twin 350XL Crusaders
Home port: Menominee, MI
Location: Green Bay, WI
Has thanked: 68 times
Been thanked: 414 times

Re: Shower sump

Post by Cooler »

I would think it is just the float switch. You can test by bypassing the switch. If it is the float switch, make sure you replace with a low profile type like the flat Attwood. Needs to stay under the screen and still get to on position. $40 instead of $200, and much easier to replace. 8-) er
Cooler By The Lake
( All weather people have to say this on air, near lakes )
User avatar
g36
Admiral
Admiral
Posts: 2115
Joined: April 7th, 2014, 6:07 pm
Vessel Info: 1997 Carver 405
Location: Soddy Daisy TN.
Has thanked: 7 times
Been thanked: 654 times

Re: Shower sump

Post by g36 »

I only posted about hair on the pump throwing breaker because I have had this happen to me and I sure never thought about it being the problem. Either thing pump or float should be a easy fix
1997 Carver 405
Crusader xli
The Black Pearl
Soddy Daisy Tn.
User avatar
Rob Lynch
Scurvy Dog
Scurvy Dog
Posts: 1
Joined: July 1st, 2021, 1:02 pm
Vessel Info: 1996 carver 440 my / 1125 hrs / twin Cummins 6ct8 turbo
Location: Georgian Bay, ON

Re: Shower sump

Post by Rob Lynch »

Just had this issue last week on our 440. Older floats relied on a mercury ball which is likely the issue. Cut the electrical feed wires and touch together. This should activate the pump confirming your float requires replacement. Inexpensive (50) and no more than 30 mins to complete
Post Reply