fender cleat
- jlarson
- Scurvy Dog

- Posts: 3
- Joined: July 15th, 2019, 3:35 pm
- Vessel Info: 2008 Carver Mariner 350
- Location: Hudson, wi
- Has thanked: 2 times
fender cleat
i have a 2008 Carver Mariner. there are 2 fender cleats at the steps going up. one of them broke but cannot figure out how to attach a new one. cannot get to it through the engine room. thoughts?
- bud37
- Admiral

- Posts: 5184
- Joined: April 23rd, 2015, 10:22 pm
- Has thanked: 604 times
- Been thanked: 1312 times
Re: fender cleat
Do you have that bolster on the inside of the cockpit by the steps.....if so look behind there.....in earlier ones there was access to the fuel fill hose/fitting, at least there was on ours. Worth a look.
FWIW.....The above is just my opinion.
- jlarson
- Scurvy Dog

- Posts: 3
- Joined: July 15th, 2019, 3:35 pm
- Vessel Info: 2008 Carver Mariner 350
- Location: Hudson, wi
- Has thanked: 2 times
Re: fender cleat
thanks. it still is too far away. will just try some screws and see if that works. appreciate your help