The sliding main hatch on our 400 is requiring more frequent attention to stay sliding. Any hints on how to get to the slider/roller on the upper and lower edges? And then what they are made of, to use the correct lubricant.
This is the smoked acrylic(?) in the inverted L shaped, and the brand is Ultrac.
I googled the brand and got nothing on Google.
Thanks
Welcome to Carver Yachts Owners Forum
We are a boating forum for owners of Carver Yachts to enthusiastically discuss all aspects of Carver Boat ownership. Whether you are looking for your first Carver or currently own one, you are sure to feel at home on CarverYachtOwners.com
You are currently viewing our board as a guest which gives you limited access to view most discussions, articles and access our other FREE features. By joining our free community you will have access to searching the forum topics, post topics, communicate privately with other members (PM), respond to polls, upload your own photos and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!
1997 Carver 400 CPMY...Main Hatch Issue
-
ID4publik
Topic author - Scurvy Dog
- Posts: 3
- Joined: February 2nd, 2016, 12:16 am
- Vessel Info: 1997 400 CPMY
We are having an increasing problem with an "Ultrac" sliding main hatch, the inverted "L" shaped acrylic (I think)...any hints how to get to the rollers/sliders on the top and bottom edges, and what they are made of? - Location: Pacific Northwest
-
Ramsport47
- Commander
- Posts: 376
- Joined: February 10th, 2013, 7:13 am
- Vessel Info: 1998 Carver 310 Santego
- Has thanked: 72 times
- Been thanked: 57 times
1997 Carver 400 CPMY...Main Hatch Issue
The company that made them for Carver is no longer in business, unfortunately. To access, you need to take the helm seat off and the metal panel it is mounted on. The door is held on by 2 or 4 screws at the top and the same at the bottom. If you are only needing access to the top, you can remove those screws and tilt the door out of the way. The tracks on those doors are "glides" and not rollers, which is part of the problem. A few years ago, we replaced the tracks with roller tracks made by another company. VERY little modification needed to be done. If interested, I will see if I can find the contact information on them. It was expensive, but the people can now open and close the door with their pinkie.
Kenny
1998 Carver 310 Santego
T-Merc 350 Mag MPI (300hp)
Port: Cedar Point Marina, Sandusky, Ohio
1998 Carver 310 Santego
T-Merc 350 Mag MPI (300hp)
Port: Cedar Point Marina, Sandusky, Ohio
-
AaHubb
- Commander
- Posts: 315
- Joined: February 16th, 2013, 5:46 pm
- Vessel Info: '99 404 CPMY
my twin diesel pusher - Location: Kennewick, Wa
- Has thanked: 15 times
- Been thanked: 61 times
1997 Carver 400 CPMY...Main Hatch Issue
Yes please post the info. I have the same door/problem. Have been spraying the tracks with Pledge (non lemon) but that doesn't last very long.
..Aaron
..Aaron
'99 404 CPMY
SeaDragon
SeaDragon
-
RGrew176
- Admiral
- Posts: 6388
- Joined: August 17th, 2015, 4:07 am
- Vessel Info: 2022 Stingray 182 SC
- Location: Southgate, MI.
- Has thanked: 72 times
- Been thanked: 467 times
1997 Carver 400 CPMY...Main Hatch Issue
AaHubb wrote:
> Yes please post the info. I have the same door/problem. Have been spraying the tracks
> with Pledge (non lemon) but that doesn't last very long.
> ..Aaron
Try a good silicone spray. I have used it for similar applications and it seems to work quite well.
> Yes please post the info. I have the same door/problem. Have been spraying the tracks
> with Pledge (non lemon) but that doesn't last very long.
> ..Aaron
Try a good silicone spray. I have used it for similar applications and it seems to work quite well.
Rick Grew
2022 Stingray 182 SC
2004 Past Commodore
West River Yacht & Cruising Club
2022 Stingray 182 SC
2004 Past Commodore
West River Yacht & Cruising Club
-
Ramsport47
- Commander
- Posts: 376
- Joined: February 10th, 2013, 7:13 am
- Vessel Info: 1998 Carver 310 Santego
- Has thanked: 72 times
- Been thanked: 57 times
1997 Carver 400 CPMY...Main Hatch Issue
AaHubb wrote:
> Yes please post the info. I have the same door/problem. Have been spraying the tracks
> with Pledge (non lemon) but that doesn't last very long.
> ..Aaron
You have to use the Lemon scented! Just kidding LOL
> Yes please post the info. I have the same door/problem. Have been spraying the tracks
> with Pledge (non lemon) but that doesn't last very long.
> ..Aaron
You have to use the Lemon scented! Just kidding LOL
Kenny
1998 Carver 310 Santego
T-Merc 350 Mag MPI (300hp)
Port: Cedar Point Marina, Sandusky, Ohio
1998 Carver 310 Santego
T-Merc 350 Mag MPI (300hp)
Port: Cedar Point Marina, Sandusky, Ohio
Return to “General Repairs & Maintenance”
Who is online
Users browsing this forum: Google [Bot], paulr and 51 guests
Sponsors