Strike plate for a 396

Anything related to the operation of your boat. Steering, Bilge Pumps, thru-hulls, bottom paint, etc.
Post Reply
User avatar
frankptam
Scurvy Dog
Scurvy Dog
Posts: 4
Joined: August 28th, 2022, 4:03 pm
Vessel Info: 2000 Carver 396
Location: Baltimore
Has thanked: 1 time

Strike plate for a 396

Post by frankptam »

Hello, We lost the strike plate for an aft cockpit door. Does anyone know where I can find one? Thanks, Frank
User avatar
frankptam
Scurvy Dog
Scurvy Dog
Posts: 4
Joined: August 28th, 2022, 4:03 pm
Vessel Info: 2000 Carver 396
Location: Baltimore
Has thanked: 1 time

Re: Strike plate for a 396

Post by frankptam »

To be specific it is the strike plate for the glass door, thank you
User avatar
KyleR
Commander
Commander
Posts: 363
Joined: July 8th, 2022, 10:50 am
Vessel Info: MV Verity
2002 Carver 396
Twin Cummins 6BTA 370HP
Location: On the move!
Has thanked: 153 times
Been thanked: 149 times

Re: Strike plate for a 396

Post by KyleR »

Are you talking about the "wing" doors that lead from the aft cockpit forward along the side of the boat? Do you have a pic of the part you are referring to? I'm having trouble picturing it.
MV Verity
2002 Carver 396
Twin Cummins 6BTA 370HP
User avatar
frankptam
Scurvy Dog
Scurvy Dog
Posts: 4
Joined: August 28th, 2022, 4:03 pm
Vessel Info: 2000 Carver 396
Location: Baltimore
Has thanked: 1 time

Re: Strike plate for a 396

Post by frankptam »

Yes those are the doors that I'm referring to.
396 strike plate IMG-4938.jpg
You do not have the required permissions to view the files attached to this post.
User avatar
KyleR
Commander
Commander
Posts: 363
Joined: July 8th, 2022, 10:50 am
Vessel Info: MV Verity
2002 Carver 396
Twin Cummins 6BTA 370HP
Location: On the move!
Has thanked: 153 times
Been thanked: 149 times

Re: Strike plate for a 396

Post by KyleR »

Is that on the door itself or on the door frame? We have a 2002 396 and have a much different latch setup. On ours the door frame has a "male" strike plate that engages with a "female" latch on the door. Here are some pics from our survey day of our setup. Yes I realize the frame looks just awful :-( - but at least you can see the kind of latch/strike plate we have.
You do not have the required permissions to view the files attached to this post.
MV Verity
2002 Carver 396
Twin Cummins 6BTA 370HP
User avatar
frankptam
Scurvy Dog
Scurvy Dog
Posts: 4
Joined: August 28th, 2022, 4:03 pm
Vessel Info: 2000 Carver 396
Location: Baltimore
Has thanked: 1 time

Re: Strike plate for a 396

Post by frankptam »

Kyle ours has the female on the door.
User avatar
KyleR
Commander
Commander
Posts: 363
Joined: July 8th, 2022, 10:50 am
Vessel Info: MV Verity
2002 Carver 396
Twin Cummins 6BTA 370HP
Location: On the move!
Has thanked: 153 times
Been thanked: 149 times

Re: Strike plate for a 396

Post by KyleR »

Gotcha - I don't know about an exact replacement, but if you take the one you have to hardware stores (big box and/or local) you may be able to find a stainless steel strike plate that has matching holes. Then just replace them both so they match! :-) But I am guessing you probably already considered that. Good luck! I still am surprised by the difference in the latch mechanisms between our boats. But with all the weird stuff I have found on ours I wouldn't be surprised if our doors had been replaced at some point! :lol:
MV Verity
2002 Carver 396
Twin Cummins 6BTA 370HP
Post Reply