Hull ID Number
- tonyiiiafl
- Admiral

- Posts: 902
- Joined: November 19th, 2015, 4:00 am
- Vessel Info: 1994 Carver 39 Cockpit Motor Yacht
- Location: Cape Cod, MA
- Has thanked: 601 times
- Been thanked: 193 times
Hull ID Number
I have a 1994 Cockpit Motor Yacht. For the life of me I cannot find the Hull ID number! I have looked on the usual starboard side transom and also the side but NOTHING. Is there a secret spot or another place they may be? ANY help would be SO appreciated!
- waybomb
- CYO Moderator

- Posts: 2745
- Joined: February 5th, 2013, 9:24 pm
- Vessel Info: 1995 Boston Whaler Rage15
1987 3697 Carver Mariner
1988 Cougar 46 Kevlar Vee offshore
1969 15' Glasspar / 1967 Johnson Electromatic 85 - Location: Saint Joseph,Mi
- Has thanked: 69 times
- Been thanked: 492 times
Re: Hull ID Number
I am pretty sure it <must> be on the Starboard transom, just under the gunnel.
Thanks
Fred
1969 Glaspar Avalon /1967 Johnson Electromatic 85
1987 Carver Mariner
1988 Cougar Kevlar 46' with triple blown 572 ci
1995 Boston Whaler Rage
Past - 1988 2807, 1989 4207 Aft
Fred
1969 Glaspar Avalon /1967 Johnson Electromatic 85
1987 Carver Mariner
1988 Cougar Kevlar 46' with triple blown 572 ci
1995 Boston Whaler Rage
Past - 1988 2807, 1989 4207 Aft
- Lyndon670
- Admiral

- Posts: 657
- Joined: July 29th, 2013, 11:35 pm
- Vessel Info: 2000 Carver 506
Volvo TAMD74EDC - Location: Georgian Bay
- Has thanked: 124 times
- Been thanked: 140 times
Re: Hull ID Number
Your survey should show where it is. Not just show the HIN, but show where the HIN is.
Lyndon,
2000 Carver 506
FOXY JOE
Volvo 7.4TAMD
Queens Cove Marina
Georgian Bay, Ontario
2000 Carver 506
FOXY JOE
Volvo 7.4TAMD
Queens Cove Marina
Georgian Bay, Ontario
-
Viper
- CYO Supporter

- Posts: 6266
- Joined: July 10th, 2015, 9:58 pm
- Vessel Info: 1989 Carver 3807 Aft Cabin
- Location: Ontario, Canada
- Has thanked: 475 times
- Been thanked: 1791 times
Re: Hull ID Number
A couple of other spots to check are on the transom under the swim platform or on one of the stringers in the engine bay. Unusual though for it not to be on the strb aft quarter of the hullside or strb corner of transom under the gunnel.
- tonyiiiafl
- Admiral

- Posts: 902
- Joined: November 19th, 2015, 4:00 am
- Vessel Info: 1994 Carver 39 Cockpit Motor Yacht
- Location: Cape Cod, MA
- Has thanked: 601 times
- Been thanked: 193 times
Re: Hull ID Number
I spoke to Carver, and they said the HID # is NOT embossed into the fiberglass, but rather a plate with 2 screws holding it onto the transom.
They did say it was also fastened onto the stringer UNDER the starboard engine. Just a plate maybe 1.5" x 6". I am sure I am going to have a "hull" of a time finding it!
They did say it was also fastened onto the stringer UNDER the starboard engine. Just a plate maybe 1.5" x 6". I am sure I am going to have a "hull" of a time finding it!-
Viper
- CYO Supporter

- Posts: 6266
- Joined: July 10th, 2015, 9:58 pm
- Vessel Info: 1989 Carver 3807 Aft Cabin
- Location: Ontario, Canada
- Has thanked: 475 times
- Been thanked: 1791 times
Re: Hull ID Number
No it's not embossed into the fiberglass, it is as they say, a white plastic plate fastened to the hull. Check out the top right picture in this link, the one with the label under it. It is not a Carver # but the plate is very similar.
http://www.customboatrepairs.com/jmla/index.php?option=com_content&view=article&id=48:tips-on-buying-a-used-boat&catid=8:boat-buying-tips&Itemid=7
http://www.customboatrepairs.com/jmla/index.php?option=com_content&view=article&id=48:tips-on-buying-a-used-boat&catid=8:boat-buying-tips&Itemid=7
- tonyiiiafl
- Admiral

- Posts: 902
- Joined: November 19th, 2015, 4:00 am
- Vessel Info: 1994 Carver 39 Cockpit Motor Yacht
- Location: Cape Cod, MA
- Has thanked: 601 times
- Been thanked: 193 times
-
Viper
- CYO Supporter

- Posts: 6266
- Joined: July 10th, 2015, 9:58 pm
- Vessel Info: 1989 Carver 3807 Aft Cabin
- Location: Ontario, Canada
- Has thanked: 475 times
- Been thanked: 1791 times