Throttle cables stiff, but only when under way?

[drewp]

1996 Carver Aft Cabin. My throttle cables are very stiff, both from the bridge and salon, but only under way. With the engines off they move great. I am looking into lubricating and even replacing, but want to see if anyone had this same experience first. Thank you all so much!

[bud37]

Have you watched the engines while underway to check for excessive movement ? Seems to me that if they are smooth when off the cables may be fine unless something is flexing.

[Viper]

Is it original equipment or has there been an upgrade to fly-by-wire controls? Do your cables go from the engine all the way to the helm controls or do they hook up to a control box first? What engine package and shifters/controls do you have?

[drewp]

QR_BBPOST Have you watched the engines while underway to check for excessive movement ? Seems to me that if they are smooth when off the cables may be fine unless something is flexing.

I do not believe the engines are moving much at all - I will confirm the next time I take the boat out. Thanks!

[drewp]

QR_BBPOST Is it original equipment or has there been an upgrade to fly-by-wire controls? Do your cables go from the engine all the way to the helm controls or do they hook up to a control box first? What engine package and shifters/controls do you have?

It is original equipment.
Unless the control box is behind the steering wheel cabinet, they go first to the helm controls, then a second line goes straight to the cockpit.
I have Crusader 350 xl engines - I will have to check on the shifters/controls later this week when I get back to the boat.
Thanks!
Drew

[km1125]

I wonder if there could be some tension on the cable when the shifter is in gear... maybe the two (four?) cables are tied together too tightly at some point?

[drewp]

QR_BBPOST I wonder if there could be some tension on the cable when the shifter is in gear... maybe the two (four?) cables are tied together too tightly at some point?

I will look at that - all the cables are zip tied together, so it may not be readily apparent - thanks!