Hi there. Just bought a 2157 21foot double cabin montego.
Can anyone help me accuire parts. AND LOTS OF THEM!!!
I live in Scotland UK and will probably need to import parts.
Id appreciate any help guys. She’s needing a lot of TLC!!!
Regards. Frizzy
Help
-
km1125
- Admiral
- Posts: 3657
- Joined: February 28th, 2017, 6:04 pm
- Has thanked: 81 times
- Been thanked: 1114 times
Re: Help
Welcome aboard, but you're going to need to be a lot more specific on what kinds of parts you need. Lots of folks on here willing to help, even several in many different countries that have probably had to deal with getting parts shipped or sourced internationally.
-
waybomb
- CYO Moderator
- Posts: 2745
- Joined: February 5th, 2013, 9:24 pm
- Vessel Info: 1995 Boston Whaler Rage15
1987 3697 Carver Mariner
1988 Cougar 46 Kevlar Vee offshore
1969 15' Glasspar / 1967 Johnson Electromatic 85 - Location: Saint Joseph,Mi
- Has thanked: 69 times
- Been thanked: 492 times
Re: Help
Carver made the hull. Most everything else came from marine vendors.
What do you need?
What do you need?
Thanks
Fred
1969 Glaspar Avalon /1967 Johnson Electromatic 85
1987 Carver Mariner
1988 Cougar Kevlar 46' with triple blown 572 ci
1995 Boston Whaler Rage
Past - 1988 2807, 1989 4207 Aft
Fred
1969 Glaspar Avalon /1967 Johnson Electromatic 85
1987 Carver Mariner
1988 Cougar Kevlar 46' with triple blown 572 ci
1995 Boston Whaler Rage
Past - 1988 2807, 1989 4207 Aft
-
Viper
- CYO Supporter
- Posts: 6266
- Joined: July 10th, 2015, 9:58 pm
- Vessel Info: 1989 Carver 3807 Aft Cabin
- Location: Ontario, Canada
- Has thanked: 475 times
- Been thanked: 1791 times
-
RGrew176
- Admiral
- Posts: 6652
- Joined: August 17th, 2015, 4:07 am
- Vessel Info: 2023 SunTracker Party Barge 22 DLX
- Location: Southgate, MI.
- Has thanked: 72 times
- Been thanked: 470 times
Re: Help
Welcome Aboard. Hope you can find all the parts you need. Good luck.
Rick Grew
2025 Godfrey Xperience 2286 SFLX
2004 Past Commodore
West River Yacht & Cruising Club
2025 Godfrey Xperience 2286 SFLX
2004 Past Commodore
West River Yacht & Cruising Club
-
Frizzy79
- Scurvy Dog
- Posts: 4
- Joined: July 22nd, 2023, 4:56 am
- Vessel Info: Carver montego 21ft double cabin.
- Location: Glasgow
- Has thanked: 7 times
- Been thanked: 1 time
Re: Help
Guys thanks for all the positive replies.
Genuinely very appreciative of the support so far.
Well where do I start for ‘what I need’
What I don’t need be a better question!!!
Long story short. I’ve decided to take a financial brain fart and have my vandalised very sorry of a state boat taken to a refurbisher and get it stripped back to bare hill and totally modernised and renewed.
Before you think I could’ve bought a much better boat for the 15 or so grand I’m into it for. I took the boat from a friend who passed away and live the boat more than his wife.
She has the aq171 Volvo penta which is rerunning and low hours. Apart from
That she’s being stripped and getting a wet room new appliances etc etc.
It’s a decision I made a little impulsively but am going through with it regardless of the financial impact as I’ve forked out a nail biting about with apparently little visual progress but I know the works being done to a very high standard.
I’ll be looking for things from materials for the furnishings to possible engine parts so any info on places I can directly phone would be great.
The boat builder working on her is NOT doing mechanical work so I’m getting a Volvo specialist for the engine, gauges steering and gear linkages etc?!
I’ve had small speed boats with outboards for years.
But this is a very different project.
Regards and thanks. John
Genuinely very appreciative of the support so far.
Well where do I start for ‘what I need’
What I don’t need be a better question!!!
Long story short. I’ve decided to take a financial brain fart and have my vandalised very sorry of a state boat taken to a refurbisher and get it stripped back to bare hill and totally modernised and renewed.
Before you think I could’ve bought a much better boat for the 15 or so grand I’m into it for. I took the boat from a friend who passed away and live the boat more than his wife.
She has the aq171 Volvo penta which is rerunning and low hours. Apart from
That she’s being stripped and getting a wet room new appliances etc etc.
It’s a decision I made a little impulsively but am going through with it regardless of the financial impact as I’ve forked out a nail biting about with apparently little visual progress but I know the works being done to a very high standard.
I’ll be looking for things from materials for the furnishings to possible engine parts so any info on places I can directly phone would be great.
The boat builder working on her is NOT doing mechanical work so I’m getting a Volvo specialist for the engine, gauges steering and gear linkages etc?!
I’ve had small speed boats with outboards for years.
But this is a very different project.
Regards and thanks. John
-
km1125
- Admiral
- Posts: 3657
- Joined: February 28th, 2017, 6:04 pm
- Has thanked: 81 times
- Been thanked: 1114 times
Re: Help
One thing you get when you go for that total refitment is knowledge of what you have when you're done. On my first boat I tore it down to the fiberglass hull and rebuilt the whole thing. I knew where every wire and every screw was in that boat, and I had planned on keeping it a LONG time.
Good luck and keep us updated on your progress!! You might want to start a dedicated thread under the "projects" folder to archive what you've done!
Good luck and keep us updated on your progress!! You might want to start a dedicated thread under the "projects" folder to archive what you've done!
Sponsors