466MY AC DUCT AFT CABIN

Anything related to the operation of your boat. Steering, Bilge Pumps, thru-hulls, bottom paint, etc.
Post Reply
User avatar
ems05#05
Scurvy Dog
Scurvy Dog
Posts: 15
Joined: September 27th, 2020, 12:21 am
Vessel Info: 2004 466 my
twin volvo tamd75
Location: mandeville la.
Has thanked: 5 times
Been thanked: 4 times

466MY AC DUCT AFT CABIN

Post by ems05#05 »

Has anyone dealt with replacing ac duct work in the aft cabin? How to reach the ends to change out.
Any suggestions would be appreciated.
Eric
User avatar
kgarguilo
First Mate
First Mate
Posts: 180
Joined: December 5th, 2022, 2:41 pm
Vessel Info: 1999 Carver 406
Location: Mobile, AL.
Has thanked: 197 times
Been thanked: 55 times

Re: 466MY AC DUCT AFT CABIN

Post by kgarguilo »

I have a 406 and I put in an AC vent in the aft cabin head. It was on the sytem schematic but not on my boat. I have seen the vent location on two the 406 models so i put a duct into the aft cabin. The ac directional splitter was behond the main closet on the port side. Had to take the entire back off the closet, then I snaked the vent through a chase next to the bed (pulled out speaker to see the chase) and nightstand. This got me to over the water heater under the bed and I then had a straight shot across the boat to the plexi panel in the head where I mounted the vent. The 466 is not the same boat but what I have learned is, you can get anywhere on these boats if you take enough of it apart.
Kevin G.
Mobile AL - Fairhope Docks Marina
1999 Carver 406
Post Reply