Replacement Mooring Chain for a 1999 445

Anything related to the operation of your boat. Steering, Bilge Pumps, thru-hulls, bottom paint, etc.
Post Reply
User avatar
Alastair MacGregor
Scurvy Dog
Scurvy Dog
Posts: 23
Joined: July 26th, 2024, 12:00 am
Vessel Info: "BAD MONKEY'
1999 445
Cummins
Safe Harbor Ventura Isle
Ventura, CA
Location: Ventura Harbor, CA
Has thanked: 17 times
Been thanked: 1 time

Replacement Mooring Chain for a 1999 445

Post by Alastair MacGregor »

New to this size boat
Ran out my chain and found it to only be 175 feet long. Last few owners didn't do much with the boat. Wanting to replace with 300'. The current chain appears to be 8mm 1.5" links stamped LH. Local shop wasn't sure of the origin suspects its a foreign make.
Any recommendations for replacement that will be compatible on my windlass?
Viper
CYO Supporter
CYO Supporter
Posts: 6266
Joined: July 10th, 2015, 9:58 pm
Vessel Info: 1989 Carver 3807 Aft Cabin
Location: Ontario, Canada
Has thanked: 475 times
Been thanked: 1791 times

Re: Replacement Mooring Chain for a 1999 445

Post by Viper »

It depends on the brand and model of your windlass. Check the rope and chain spec for that particular unit to ensure you're getting the correct chain size.
User avatar
KyleR
Commander
Commander
Posts: 363
Joined: July 8th, 2022, 10:50 am
Vessel Info: MV Verity
2002 Carver 396
Twin Cummins 6BTA 370HP
Location: On the move!
Has thanked: 153 times
Been thanked: 149 times

Re: Replacement Mooring Chain for a 1999 445

Post by KyleR »

Before we purchased new chain recently, I took my gypsy off my windlass (Maxwell Freedom 800) and took it to West Marine to ensure the correct fit. Our chain was 5/16" and we went with the Grade 43 (G4) High Test chain.

Do you know the model of your windlass? There are several varieties of chain (e.g. some for mooring, some with longer links, some with shorter links, some designed for windlasses) so do your due diligence before purchasing.

Good luck!
Kyle
MV Verity
2002 Carver 396
Twin Cummins 6BTA 370HP
User avatar
Alastair MacGregor
Scurvy Dog
Scurvy Dog
Posts: 23
Joined: July 26th, 2024, 12:00 am
Vessel Info: "BAD MONKEY'
1999 445
Cummins
Safe Harbor Ventura Isle
Ventura, CA
Location: Ventura Harbor, CA
Has thanked: 17 times
Been thanked: 1 time

Re: Replacement Mooring Chain for a 1999 445

Post by Alastair MacGregor »

Thank you, will check it out
Viper
CYO Supporter
CYO Supporter
Posts: 6266
Joined: July 10th, 2015, 9:58 pm
Vessel Info: 1989 Carver 3807 Aft Cabin
Location: Ontario, Canada
Has thanked: 475 times
Been thanked: 1791 times

Re: Replacement Mooring Chain for a 1999 445

Post by Viper »

Which brand and model windlass do you have? The Maxwell Freedom 800 was used a lot back then. If that's what you have, it's 5/16" G4 chain.
Post Reply