Embroidered pillows, towels, 3D Prints, etc.

cpoint · Post by **cpoint** » January 5th, 2021, 5:02 pm

Customization

g36 · Post by **g36** » January 8th, 2021, 11:05 am

Very nice, hope they succeed

Carverlvr2 · Post by **Carverlvr2** » January 21st, 2025, 5:41 pm

I know this is an older thread but do you have embroidered “Carver Yachts” towels or other accessories?

Capt Morgan · Post by **Capt Morgan** » January 27th, 2025, 9:19 pm

Yes I am interested as well.

thatchh · Post by **thatchh** » March 9th, 2025, 12:20 am

HMC (boatbeds.com) can do custom embroidered linens. I ran into them at the Miami boat show. They did a lot of the original mattresses and linens for Carver and still have a lot of the patterns. Look at their website. Not cheap, but they have the capability. I'm about to order some sheets for fit the oval mattress in my 396 master cabin.

cpoint · Post by **cpoint** » April 22nd, 2025, 12:24 pm

Hi all, sorry was gone for a while, back now. Actually, this is not my business but can make some. Also, I been doing some 3D prints for personal use on my boat. I'll post some of those as well. So let me know if and what you are still interested in I can get back to you. Sorry for delay in responding.

Carverlvr2 · Post by **Carverlvr2** » April 22nd, 2025, 7:48 pm

Can you do the carver logo (2004 era) onto pillow cases, blankets, floaty key chains?

cpoint · Post by **cpoint** » April 24th, 2025, 3:37 pm

let me look at some 2004 logos. 3D printed stuff not a problem for key chains, did you have something in mind, shape/color wise? Next week I will try to post some things that I already did for self-use.

or better yet, if you provide the logo specific to your boat that would help. or if you want the boat name, that will help as well to provide name and logo preference. As you see on mine, I added a logo over the boat name.

cpoint · Post by **cpoint** » April 30th, 2025, 11:29 am

Someone unfortunately broke the railing upfront as seen on one of the images. I used JB Weld to put it back in place, as it does not require support strength. 3D printed cover, which by itself is strong enough to hold the rail in place. And makes nice CARVER custom look up at bow

It is screwed in with 4 stainless steel in-side. I only added to starboard side but will add another to port side as well for looks. If you are interested let me know. This is for Carver 356 aftcabin, year 2000. Vertical rail is 1 inch, horizontal is 1/2 inch, with angle 35.0 degree.

cpoint · Post by **cpoint** » April 30th, 2025, 11:45 am

In regard to Towels, pillowcases I can do from $25 and up depending on item, size and colors. Towels shown in original posting above, CARVER, includes towel as pictured $35 + shipping. Custom name /logo as seen in other towel picture $40 and up + shipping. If you send me a picture of what you would like and on what material, I can provide more precise price. As far as 3D pieces, you can request what it is looking for price. slowly I will add what I already have on this site for already designed/printed items for my personal use. Thanks.

Embroidered pillows, towels, 3D Prints, etc.

Embroidered pillows, towels, 3D Prints, etc.

Re: Embroidered pillows, towels, etc.

Re: Embroidered pillows, towels, etc.

Re: Embroidered pillows, towels, etc.

Re: Embroidered pillows, towels, etc.

Re: Embroidered pillows, towels, etc.

Re: Embroidered pillows, towels, etc.

Re: Embroidered pillows, towels, etc.

Re: Embroidered pillows, towels, etc.

Re: Embroidered pillows, towels, etc.