depth gauge not working, not displaying anything
- cpoint
- Commander

- Posts: 453
- Joined: April 20th, 2016, 1:00 pm
- Vessel Info: 2000 Carver 356 aft cabin
- Has thanked: 208 times
- Been thanked: 32 times
depth gauge not working, not displaying anything
Hi all, hope some one else have not posted this question, as my search came back empty. I recently purchased my 2000 carver 356 aft cabin. As I am getting more familiar with it I am finding out some minor issues. latest one is the depth gauge is not working. It was fine when we purchased it. After purchasing we docked it for about 3 weeks. When purchased, the boat was off water and bottom was painted before we signed the papers. So my question is, is it possible stuff formed under the boat at dock that's causing the dept gauge to not show anything? or is there some switch that I am missing? or fuse hidden somewhere? loose cable? if so where would that be located in the hull? I just remember when the engine started it went on first time 3 weeks ago. But now starting the engine shows no life in the unit. No lights, no displays. Any help is appreciated. Thanks in advance.
- waybomb
- CYO Moderator

- Posts: 2745
- Joined: February 5th, 2013, 9:24 pm
- Vessel Info: 1995 Boston Whaler Rage15
1987 3697 Carver Mariner
1988 Cougar 46 Kevlar Vee offshore
1969 15' Glasspar / 1967 Johnson Electromatic 85 - Location: Saint Joseph,Mi
- Has thanked: 69 times
- Been thanked: 492 times
Re: depth gauge not working, not displaying anything
I'd be looking for a switch or a fuse.
Thanks
Fred
1969 Glaspar Avalon /1967 Johnson Electromatic 85
1987 Carver Mariner
1988 Cougar Kevlar 46' with triple blown 572 ci
1995 Boston Whaler Rage
Past - 1988 2807, 1989 4207 Aft
Fred
1969 Glaspar Avalon /1967 Johnson Electromatic 85
1987 Carver Mariner
1988 Cougar Kevlar 46' with triple blown 572 ci
1995 Boston Whaler Rage
Past - 1988 2807, 1989 4207 Aft
- My Jurisdiction
- Scurvy Dog

- Posts: 17
- Joined: August 2nd, 2015, 9:25 am
- Vessel Info: 1981 3007 aft cabin
- Has thanked: 19 times
- Been thanked: 3 times
Re: depth gauge not working, not displaying anything
My first question is, what kind of gauge are we talking about. Have a DVD 70 Garmin. Having the same issue Garmin has sent a software up date. It was to solve my problem thus far hasn't done so.
- My Jurisdiction
- Scurvy Dog

- Posts: 17
- Joined: August 2nd, 2015, 9:25 am
- Vessel Info: 1981 3007 aft cabin
- Has thanked: 19 times
- Been thanked: 3 times
- mjk1040
- Admiral

- Posts: 1531
- Joined: July 30th, 2015, 8:15 am
- Vessel Info: 1998 355 AC/MY "Deja Vu"
- Location: Savannah, NY
- Has thanked: 9 times
- Been thanked: 248 times
Re: depth gauge not working, not displaying anything
The depth gauge on our 355 is tied to a spare helm switch, the spare switch has to be on to power the depth gauge.
Mike
Mike
Mike
I'd Rather Be Boating!
1989 Sea Ray Seville
1986 Carver Mariner 32'
1990's Thompson 22' Cuddy Cabin
1990's 4Winns 245 Vista Cruiser
1980's Thompson 19' Open Bow
I'd Rather Be Boating!
1989 Sea Ray Seville
1986 Carver Mariner 32'
1990's Thompson 22' Cuddy Cabin
1990's 4Winns 245 Vista Cruiser
1980's Thompson 19' Open Bow
- cpoint
- Commander

- Posts: 453
- Joined: April 20th, 2016, 1:00 pm
- Vessel Info: 2000 Carver 356 aft cabin
- Has thanked: 208 times
- Been thanked: 32 times
Re: depth gauge not working, not displaying anything
Thanks for the reply. I will check when I get back to it, most likely this weekend. I believe it is built in unit. circle about 2.5 inches. only shows dept. I did not see any fuse (under steps as you enter into cabin). There are no spare switches in the cabin. Although now I recall there are some switches labeled spare I believe up on top where the depth gauge is. I will take another look at those.
- tomschauer
- Admiral

- Posts: 2323
- Joined: March 28th, 2016, 10:52 pm
- Vessel Info: 1998 Carver 355
Suspicious Fishes !
2022 Kawasaki 310X - Location: upper chesapeake bay
- Has thanked: 326 times
- Been thanked: 602 times
Re: depth gauge not working, not displaying anything
Not sure about the 356, but my 355 operates off a "spare" switch on the dash. Also breakers for all helm equipment under the seat in front of the helm.
Tom
Tom
- cpoint
- Commander

- Posts: 453
- Joined: April 20th, 2016, 1:00 pm
- Vessel Info: 2000 Carver 356 aft cabin
- Has thanked: 208 times
- Been thanked: 32 times
Re: depth gauge not working, not displaying anything
thanks, for the record 356 also on the spare switch. that was a close call, almost bought a new dept finder. 
