US Water 200 GPD Watermaker - Techie advice/analysis

ImageThis forum is for general discussion of all things Boating. If it's boating related and doesn't fit in another forum, post it here!
Post Reply
User avatar
John Easley
Scurvy Dog
Scurvy Dog
Posts: 40
Joined: June 4th, 2016, 7:21 am
Vessel Info: Sold a 1986 42' Chris Craft Catalina. Looking for a 1999-2006 530 Voyager Pilothouse.
Location: Lakeland, FL
Has thanked: 5 times
Been thanked: 8 times

US Water 200 GPD Watermaker - Techie advice/analysis

Post by John Easley »

We're shopping for our first boat and leaning toward a Mariner 36. On our list of "nice to have" features is a reverse osmosis watermaker so we don't have to worry about the 70 gallon limit on the tank. We found prices ranging from $4400 to well over $6000. Then I accidentally stumbled across this unit from US Water : https://www.uswatersystems.com/us-water-200-gpd-floor-mount-light-commercial-line-pressure-ro-system-with-20-pre-filters.html?gclid=CPXA9fWUjs0CFZQbgQodnn0D6Q. It says it's RO, has three stages of filtering, and produces 200 gallons per day... for only $395??? Seems like I'm missing something here. We would appreciate it if someone who is more knowledgeable about these systems could take a look and shed some light.

Thanks.

John
User avatar
bud37
Admiral
Admiral
Posts: 5182
Joined: April 23rd, 2015, 10:22 pm
Has thanked: 604 times
Been thanked: 1312 times

Re: US Water 200 GPD Watermaker - Techie advice/analysis

Post by bud37 »

I will take a flyer here and say that the 395 one is the type you have at home under the sink for drinking water from city water, not the desalinization system you probably want for turning salt water into drinking water where you are...
FWIW.....The above is just my opinion.
User avatar
John Easley
Scurvy Dog
Scurvy Dog
Posts: 40
Joined: June 4th, 2016, 7:21 am
Vessel Info: Sold a 1986 42' Chris Craft Catalina. Looking for a 1999-2006 530 Voyager Pilothouse.
Location: Lakeland, FL
Has thanked: 5 times
Been thanked: 8 times

Re: US Water 200 GPD Watermaker - Techie advice/analysis

Post by John Easley »

Thanks, bud37. You're probably right. Desalinization takes high pressure. Like, 800 psi high pressure. This system lacks the high pressure pump to handle that. Thanks for pointing it out.
User avatar
feeez
Commander
Commander
Posts: 421
Joined: May 14th, 2014, 6:32 am
Vessel Info: 2001 350 Mariner
Location: Beacon Bay Penetanguishine Ontario
Has thanked: 52 times
Been thanked: 66 times

Re: US Water 200 GPD Watermaker - Techie advice/analysis

Post by feeez »

Welcome to the forum John. Happy hunting. This is a great resource for you as go through this process. We are in our 3rd season with our 2001 350 Mariner and are very pleased with the vessel.

I am sure you have be already been harped on about it...... but just incase..... on word before you buy "SURVEY'!!!!

Cheers
Fraser
Former 2001 350 Mariner owner
User avatar
nightsky
Deck Hand
Deck Hand
Posts: 67
Joined: June 25th, 2016, 10:13 pm
Vessel Info: '94 Carver 390 cpmy
Location: Comox, BC
Has thanked: 6 times
Been thanked: 16 times

Re: US Water 200 GPD Watermaker - Techie advice/analysis

Post by nightsky »

I had a 500gpd RO watermaker from ProWatermaker out of Portland OR. The cost on that was $3300 at that time (2005?). Simple operation, no electronics, only manual operation. Good customer service, FWIW. Good luck on your search.
Post Reply