Steering
- Vinceaux
- Scurvy Dog

- Posts: 5
- Joined: July 24th, 2016, 10:36 pm
- Vessel Info: 1977 Carver Santa Cruz, twin 302 ford engines, 28'4", upper and lower drive stations,
- Location: Lake charles,Louisiana
Steering
Hey there everyone. I have a 76 Sanya cruz amd im looking for the steering system name that is on my boat. Does anyone know where I could possibly find out what i have and where I might be able to find a replacement?
- g36
- Admiral

- Posts: 2115
- Joined: April 7th, 2014, 6:07 pm
- Vessel Info: 1997 Carver 405
- Location: Soddy Daisy TN.
- Has thanked: 7 times
- Been thanked: 654 times
Re: Steering
Assumig hydraulic. My guess It's probably hynautic or a teleflex syten system. Look at the steering cylinder on the steering linkage by the rudders should have a name there.
1997 Carver 405
Crusader xli
The Black Pearl
Soddy Daisy Tn.
Crusader xli
The Black Pearl
Soddy Daisy Tn.
- Vinceaux
- Scurvy Dog

- Posts: 5
- Joined: July 24th, 2016, 10:36 pm
- Vessel Info: 1977 Carver Santa Cruz, twin 302 ford engines, 28'4", upper and lower drive stations,
- Location: Lake charles,Louisiana
- Vinceaux
- Scurvy Dog

- Posts: 5
- Joined: July 24th, 2016, 10:36 pm
- Vessel Info: 1977 Carver Santa Cruz, twin 302 ford engines, 28'4", upper and lower drive stations,
- Location: Lake charles,Louisiana
Re: Steering
After pulling the fresh water tank out along with it's base I found the problem. The bracket that held the rear cable in place had corroded past it's life span, which looked like it was made of pot metal, not aluminum. Went to a friends fab shop, got some aluminum plate and used the front holder as a guide, and fabbed up my own bracket for a spot in the center of the bracket. I now have steering. Was told by the former owner him and his dad used the engines to drive, which is rather unsafe in my book. Running and under way as of last Thursday.