Carver 466 Model

The is the forum to discuss general information regarding all Carver Yachts.
Post Reply
User avatar
byresch
Scurvy Dog
Scurvy Dog
Posts: 8
Joined: January 24th, 2017, 5:16 pm
Vessel Info: In 2020 looking forward to good health and eventually buying a Carver.
Location: Tampa, FL

Carver 466 Model

Post by byresch »

We are going to look at a 2005 and a 2006 located close to Fort Myers, FL that we want to use for a week-end boat and also to cruise the Caribbean Islands by island hopping. Is this a good boat for the purpose we want to use it for?
User avatar
Lyndon670
Admiral
Admiral
Posts: 657
Joined: July 29th, 2013, 11:35 pm
Vessel Info: 2000 Carver 506
Volvo TAMD74EDC
Location: Georgian Bay
Has thanked: 124 times
Been thanked: 140 times

Re: Carver 466 Model

Post by Lyndon670 »

I have a 506 and it handles well in relatively big water (5-8ft). It is a wet ride for sure. These aren't off shore boats by any stretch of the imagination but are completely competent for heading to the Bahamas and island hopping. The big thing is - as with any boat - to pick your travel day(s) with a large margin of error. I spoke with a couple last fall who took their 59 Marquis Markham Edition to the Bahamas and said it was the scariest thing they ever did and now the boat is for sale.

As long as your travel day works, you practise the 1/3 rule for fuel you should be fine. If (when) I take my boat south, I will be investing in a watermarker though as the price of fresh water is unreal. Might want to consider that as well.
Lyndon,
2000 Carver 506
FOXY JOE
Volvo 7.4TAMD
Queens Cove Marina
Georgian Bay, Ontario
User avatar
Tennessee River Rat
Scurvy Dog
Scurvy Dog
Posts: 27
Joined: July 11th, 2016, 1:43 pm
Vessel Info: 2001 Carver 506 Aft Cabin 480 Volvo's
2007 Meridian 341 with 6.2 MPI Horizon Mercruiser Engines
1988 Sea Ray 340 with Twin 454's
1987 Stratos with 200 HP Merc
Location: Joe Wheeler Marina-Rogersville, AL
Has thanked: 3 times
Been thanked: 6 times

Re: Carver 466 Model

Post by Tennessee River Rat »

I also have the 506 but the Voyagers have a better hull design for traveling on the open seas. Has a deeper V hull then the 466 & 506. But I would agree with Lyndon, picking your days is most important in any boat.
User avatar
mjk1040
Admiral
Admiral
Posts: 1531
Joined: July 30th, 2015, 8:15 am
Vessel Info: 1998 355 AC/MY "Deja Vu"
Location: Savannah, NY
Has thanked: 9 times
Been thanked: 248 times

Re: Carver 466 Model

Post by mjk1040 »

So it seems it's not the size or design of the boat as much as its the nature of the body of water u r traveling that's going to be ur deciding factor!
Mike :down:
I'd Rather Be Boating!
1989 Sea Ray Seville
1986 Carver Mariner 32'
1990's Thompson 22' Cuddy Cabin
1990's 4Winns 245 Vista Cruiser
1980's Thompson 19' Open Bow
User avatar
Lyndon670
Admiral
Admiral
Posts: 657
Joined: July 29th, 2013, 11:35 pm
Vessel Info: 2000 Carver 506
Volvo TAMD74EDC
Location: Georgian Bay
Has thanked: 124 times
Been thanked: 140 times

Re: Carver 466 Model

Post by Lyndon670 »

I also have the 506 but the Voyagers have a better hull design for traveling on the open seas. Has a deeper V hull then the 466 & 506


The 506 and 53 share the identical hull. The deadrise is the same on both boats. I am certain that the 57 is just a stretched version but am not 100% on that fact.
Lyndon,
2000 Carver 506
FOXY JOE
Volvo 7.4TAMD
Queens Cove Marina
Georgian Bay, Ontario
User avatar
Lyndon670
Admiral
Admiral
Posts: 657
Joined: July 29th, 2013, 11:35 pm
Vessel Info: 2000 Carver 506
Volvo TAMD74EDC
Location: Georgian Bay
Has thanked: 124 times
Been thanked: 140 times

Re: Carver 466 Model

Post by Lyndon670 »

Confirmed - the 506, 53 Voyager and 57 Voyager all have the same hull. The 57 is a stretch version. The deadrise is the same 13 degrees on all of them so handling will be no different. The only difference is that the 57 will have a higher hull speed. The Voyager series do carry 300 gallons more fuel than the 506 so range is obviously extended.
Lyndon,
2000 Carver 506
FOXY JOE
Volvo 7.4TAMD
Queens Cove Marina
Georgian Bay, Ontario
Post Reply