Greetings -

Just purchased a 1996 Express 440 and have found the glides on the main cabin door are worn out. The glass door seems fine though. Does anyone have any ideas for a source for parts? Thank you! Given the age of the boat, I expect I might be posting here with lots of questions.

Best,

TS - Boo's Cruiser

Motors are 350 crusaders with recently rebuilt carbs, manual says max rpm should be between 4000 and 4400 rpm. Refinished the hull with new antifoul in January so hull should be clean. I believe the props are 18 x 19 four blade. During sea trial motors wouldn't get over 3000 rpm. Seemed like they were bogged down working too hard. Boat wouldn't do more than 11 knots. Maybe the props are not sized right? Anyone know how to find what the original size and pitch should be on this boat?

Hi everyone
I have a 2006 Carver 41 Sport Motor Yacht
My aft waste water tank is full and for the life of me, can't find where the switch to empty the waste water tank! Is it on the main AC or DC control panel?
Or in the engine room?
Much appreciated for your kind help
Email me directly at gerard.chuah@gmail.com
Best regards
Gerard Chuah from Singapore

I'm sorry, I'm new to Carver boats and have what I think is a stupid question. In my Aft cabin under an access panel, There is a thick hose that leads outside to the bottom of my boat and has a shutoff valve. what exits or enters in this hose?

I have a 2003 Carver 444 with Volvo TAMD 63P A engines. The engine have 1400 hours on them the best I am able to come up with since the previous owner kept poor records. The Stbd engine starts and idles at 683 while the Port engine starts and idles at 585. I was told the only way to adjust the idle was electronically, but this boat has the KE-4 system and I can clearly see the idle adjustment bolt on both engines. Is this something I need to be concerned about and adjust the idle rpms or is this ...

I am seen questions & answers regarding where this switch is to turn on and off. We have looked inside the storage cabinet next to the salon doors and there is no push button or switch inside. We have no switch located inside the doors. Can anyone give us ideas on where this might be located? Any help would greatly be appreicated.

Thank you,
TL Werthmann

I just purchased a 2004 Carver Mariner 420, and have been unable to locate the Sea strainer for the AC unit. Any clues would be appreciated (I’ve looked all over)

We have 2 potable water tanks on this boat, however when I fill it up only one tank fills. Ant ideas on how to fill the second tank?

My AC #2 on a Carver 355 keeps tripping the breaker switch. Does anyone know how to replace the breaker? Looks easy but not completely sure.

Thanks

We just put our 2007 Carver 42 Super Sport back in the water and the head pump is running (the head tanks are empty). Any suggestions on how to get it to turn off. We turned the breaker off so it won’t burn out.