Port Engine Overheating

GAS engine, transmission and generator repair and maintenance discussion forum.
User avatar
RickieT
Deck Hand
Deck Hand
Posts: 52
Joined: June 17th, 2017, 5:33 pm
Vessel Info: Carver 350 Mariner 1997
Location: Sausalito, CA
Has thanked: 18 times
Been thanked: 3 times
Contact:

Port Engine Overheating

Post by RickieT »

Greetings,

Bought my first boat!!! Very excited and want to learn to do my own repairs, if at all possible. Have a 1997 350 Mariner with a 2 Crusader 350 XL engines. Starboard engine temp is perfect and port engine overheats when over 2200. Had a mechanic come in fill coolant check hoses and replaced both engine's impellers thinking that would do the trick. It's a little better but still overheats and white smoke emits from port engine. I'm thinking of trying Sea Flush with Barnacle buster or Salt Away on my own as a next troubleshooting step and last resort replacing the riser(s). Those are big bucks come to find out. I've been watching you tube videos on this process. Anyone have a link or tips for flushing all the crap that may be in the engine making it overheat? Do I need to remove the impellers when doing this chemical flush? Before I purchased the boat it had sat for a long while...

Many thanks

Rick
User avatar
mjk1040
Admiral
Admiral
Posts: 1531
Joined: July 30th, 2015, 8:15 am
Vessel Info: 1998 355 AC/MY "Deja Vu"
Location: Savannah, NY
Has thanked: 9 times
Been thanked: 248 times

Re: Port Engine Overheating

Post by mjk1040 »

OK Rick; I assume u have closed cooling by ur narrative. White smoke suggest u are burning the antifreeze. Head or intake gasket is bad. A cooler is bad and letting anti freeze into the exhaust via the raw water system. Does ur antifreeze level drop over time? Now ur in salt water I take it and replacing exhaust manifolds is common about every 5 years or so. How long did it sit on the dry? Can u post a pic of the smoke sometime? The Barnacle buster etc. can just be put in a pail and sucked in with the fresh water pumps. Let it stand in the engine for a good period of time, then just fire it up to flush out the junk. But as I said true white smoke indicates ur burning antifreeze. Keep us posted.
Mike :down:
I'd Rather Be Boating!
1989 Sea Ray Seville
1986 Carver Mariner 32'
1990's Thompson 22' Cuddy Cabin
1990's 4Winns 245 Vista Cruiser
1980's Thompson 19' Open Bow
User avatar
SanJuanDreamer
First Mate
First Mate
Posts: 170
Joined: April 4th, 2016, 4:02 pm
Vessel Info: Still Searching
Location: Seattle
Has thanked: 1 time
Been thanked: 21 times

Re: Port Engine Overheating

Post by SanJuanDreamer »

If the exhaust system hasn't been changed between 5 to 7 years, you should seriously consider getting that done.
Also, rod out the Heat Exchanger and replace the U-cooler.
You didn't post much info about your motors so I'm going with what I did on my Mariner.
User avatar
bud37
Admiral
Admiral
Posts: 5184
Joined: April 23rd, 2015, 10:22 pm
Has thanked: 604 times
Been thanked: 1312 times

Re: Port Engine Overheating

Post by bud37 »

Rick.... Just to add to all above, your white "smoke" could just be steam from a flow restriction....chances are if you are burning antifreeze you will smell a sweet smell from the exhaust.....what did your mechanic say about the steam ?

edit , spellcheck correction.... :-D
Last edited by bud37 on January 23rd, 2018, 8:41 pm, edited 1 time in total.
FWIW.....The above is just my opinion.
User avatar
RickieT
Deck Hand
Deck Hand
Posts: 52
Joined: June 17th, 2017, 5:33 pm
Vessel Info: Carver 350 Mariner 1997
Location: Sausalito, CA
Has thanked: 18 times
Been thanked: 3 times
Contact:

Re: Port Engine Overheating

Post by RickieT »

RickieT wrote:Qr Bbpost Greetings,

Bought my first boat!!! Very excited and want to learn to do my own repairs, if at all possible. Have a 1997 350 Mariner with a 2 Crusader 350 XL engines. Starboard engine temp is perfect and port engine overheats when over 2200. Had a mechanic come in fill coolant check hoses and replaced both engine's impellers thinking that would do the trick. It's a little better but still overheats and white smoke emits from port engine. I'm thinking of trying Sea Flush with Barnacle buster or Salt Away on my own as a next troubleshooting step and last resort replacing the riser(s). Those are big bucks come to find out. I've been watching you tube videos on this process. Anyone have a link or tips for flushing all the crap that may be in the engine making it overheat? Do I need to remove the impellers when doing this chemical flush? Before I purchased the boat it had sat for a long while...

Many thanks

Rick
You do not have the required permissions to view the files attached to this post.
User avatar
RickieT
Deck Hand
Deck Hand
Posts: 52
Joined: June 17th, 2017, 5:33 pm
Vessel Info: Carver 350 Mariner 1997
Location: Sausalito, CA
Has thanked: 18 times
Been thanked: 3 times
Contact:

Re: Port Engine Overheating

Post by RickieT »

RickieT wrote:Qr Bbpost Greetings,

Bought my first boat!!! Very excited and want to learn to do my own repairs, if at all possible. Have a 1997 350 Mariner with a 2 Crusader 350 XL engines. Starboard engine temp is perfect and port engine overheats when over 2200. Had a mechanic come in fill coolant check hoses and replaced both engine's impellers thinking that would do the trick. It's a little better but still overheats and white smoke emits from port engine. I'm thinking of trying Sea Flush with Barnacle buster or Salt Away on my own as a next troubleshooting step and last resort replacing the riser(s). Those are big bucks come to find out. I've been watching you tube videos on this process. Anyone have a link or tips for flushing all the crap that may be in the engine making it overheat? Do I need to remove the impellers when doing this chemical flush? Before I purchased the boat it had sat for a long while...

Many thanks

Rick



https://youtu.be/pmoAFmMrXU4
User avatar
RickieT
Deck Hand
Deck Hand
Posts: 52
Joined: June 17th, 2017, 5:33 pm
Vessel Info: Carver 350 Mariner 1997
Location: Sausalito, CA
Has thanked: 18 times
Been thanked: 3 times
Contact:

Re: Port Engine Overheating

Post by RickieT »

Here is the smoke/steam...
User avatar
RickieT
Deck Hand
Deck Hand
Posts: 52
Joined: June 17th, 2017, 5:33 pm
Vessel Info: Carver 350 Mariner 1997
Location: Sausalito, CA
Has thanked: 18 times
Been thanked: 3 times
Contact:

Re: Port Engine Overheating

Post by RickieT »

mjk1040 wrote:Qr Bbpost OK Rick; I assume u have closed cooling by ur narrative. White smoke suggest u are burning the antifreeze. Head or intake gasket is bad. A cooler is bad and letting anti freeze into the exhaust via the raw water system. Does ur antifreeze level drop over time? Now ur in salt water I take it and replacing exhaust manifolds is common about every 5 years or so. How long did it sit on the dry? Can u post a pic of the smoke sometime? The Barnacle buster etc. can just be put in a pail and sucked in with the fresh water pumps. Let it stand in the engine for a good period of time, then just fire it up to flush out the junk. But as I said true white smoke indicates ur burning antifreeze. Keep us posted.


The boat just wasn't used a lot...it wasn't out of the water at all for a long period of time.
User avatar
throwback2
First Mate
First Mate
Posts: 125
Joined: January 13th, 2014, 10:38 am
Vessel Info: 1987 Carver 28 Voyager,twin small blocks,1991 Shamrock,350 Chevy now.
1973 Atlantic Craft 15, 2004 2 smoke Merc 40,
and a few other water toys
Has thanked: 8 times
Been thanked: 23 times

Re: Port Engine Overheating

Post by throwback2 »

Looks like steam to me.My suggestion would be to clean the oil cooler and heat exchanger. You'd be surprised what gets caught and grows.Also,get yourself a temperature scan gun ( Harbor freight $20-$30) and It can help you find where restriction(s) could be.
User avatar
RickieT
Deck Hand
Deck Hand
Posts: 52
Joined: June 17th, 2017, 5:33 pm
Vessel Info: Carver 350 Mariner 1997
Location: Sausalito, CA
Has thanked: 18 times
Been thanked: 3 times
Contact:

Re: Port Engine Overheating

Post by RickieT »

mjk1040 wrote:Qr Bbpost OK Rick; I assume u have closed cooling by ur narrative. White smoke suggest u are burning the antifreeze. Head or intake gasket is bad. A cooler is bad and letting anti freeze into the exhaust via the raw water system. Does ur antifreeze level drop over time? Now ur in salt water I take it and replacing exhaust manifolds is common about every 5 years or so. How long did it sit on the dry? Can u post a pic of the smoke sometime? The Barnacle buster etc. can just be put in a pail and sucked in with the fresh water pumps. Let it stand in the engine for a good period of time, then just fire it up to flush out the junk. But as I said true white smoke indicates ur burning antifreeze. Keep us posted.


I think this is steam...I posted a youtube video of it and my gauges at the time it was overheating...it is in salt water...San Francisco Bay
Post Reply