Hey there everyone.
I was on the 'hook' and when I turned on the anchor light I did not get 360 white but just 180 aft light. When I switch to running, aft white stays and forward red/green power on.
Do you know if there are 2 bulbs in the mast?
I don't know if its a switch or bulb issue.
It will be good info to have prior to breaking out a ladder to get up there .
Also, are you guys replacing these bulbs with LED or keeping the original incandescent.
My vessel is a 2005 Mariner..
Thanks.
Welcome to Carver Yachts Owners Forum
We are a boating forum for owners of Carver Yachts to enthusiastically discuss all aspects of Carver Boat ownership. Whether you are looking for your first Carver or currently own one, you are sure to feel at home on CarverYachtOwners.com
You are currently viewing our board as a guest which gives you limited access to view most discussions, articles and access our other FREE features. By joining our free community you will have access to searching the forum topics, post topics, communicate privately with other members (PM), respond to polls, upload your own photos and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!
Anchor Light
-
km1125
- Admiral
- Posts: 3500
- Joined: February 28th, 2017, 6:04 pm
- Has thanked: 69 times
- Been thanked: 1043 times
Re: Anchor Light
Yes, there are two bulbs in those kind of combination lights.
You can typically replace with an LED, but you need a good quality LED, not just a cheap replacement. Cheap replacements might work but they expect a constant voltage and don't tolerate surges that great. Good quality bulbs will work the same over a wider voltage range and are preferred over the cheap ones especially for something as important as a navigation light.
Replacing both bulbs with LEDs would be desirable in an anchor light situation as they draw MUCH less power from the battery when on the hook.
You can typically replace with an LED, but you need a good quality LED, not just a cheap replacement. Cheap replacements might work but they expect a constant voltage and don't tolerate surges that great. Good quality bulbs will work the same over a wider voltage range and are preferred over the cheap ones especially for something as important as a navigation light.
Replacing both bulbs with LEDs would be desirable in an anchor light situation as they draw MUCH less power from the battery when on the hook.
-
bud37
- Admiral
- Posts: 4865
- Joined: April 23rd, 2015, 10:22 pm
- Has thanked: 579 times
- Been thanked: 1210 times
Re: Anchor Light
denpooch wrote:Source of the post Also, are you guys replacing these bulbs with LED or keeping the original incandescent
If you decide to change to led, a good idea IMO , check the CG regs in your area as the anchor light may need to be visible for a required distance.....some of the bulbs may have ratings, IDK for sure. Doesn't hurt to be in the know..
The above is strictly my opinion.
-
buster53
- Admiral
- Posts: 1026
- Joined: May 12th, 2017, 10:41 am
- Vessel Info: 2001, Carver 356
- Location: Lower Potomac, VA
- Has thanked: 9 times
- Been thanked: 261 times
Re: Anchor Light
bud37 wrote:Source of the postdenpooch wrote:Source of the post Also, are you guys replacing these bulbs with LED or keeping the original incandescent
If you decide to change to led, a good idea IMO , check the CG regs in your area as the anchor light may need to be visible for a required distance.....some of the bulbs may have ratings, IDK for sure. Doesn't hurt to be in the know..
Chances are good that any LED equivalent will be at least as bright and probably brighter than the incandescent it replaces. And yes, I would replace any bulbs you have to LED, not just running lights, but interior lights as well.
-
denpooch
Topic author
- Commander
- Posts: 385
- Joined: April 9th, 2017, 8:03 pm
- Vessel Info: 2005 360 Mariner
Crusader 6.0 Captains Choice - Location: Long Island
- Has thanked: 85 times
- Been thanked: 86 times
Re: Anchor Light
Thanks everyone. LED it is!
Return to “General Repairs & Maintenance”
Who is online
Users browsing this forum: No registered users and 129 guests
Sponsors