Vent...exhaust questions...

Anything related to the operation of your boat. Steering, Bilge Pumps, thru-hulls, bottom paint, etc.
User avatar
benica
Scurvy Dog
Scurvy Dog
Posts: 36
Joined: September 8th, 2022, 6:08 am
Vessel Info: 1997 355 Aft cabin. 7.4 engines.
Has thanked: 1 time
Been thanked: 9 times

Vent...exhaust questions...

Post by benica »

1997 355.
Pictures attached.
Never realized until now..went to remove the SB side plastic vent cover...supposedly exhaust vent..please confirm...Air blowing through.
Hooked up to shore power. Not running engines or generator...but air is being pushed through...blower?
Wondering...is it a sensor that turns the blower on if the engine compartment gets..too hot? When I turned the main switch (DC Main) panel to the off position...the blower stops.
We can hear...something in the engine compartment running...but again...turned the DC Main switch off...stops. Nothing on the panel indicates this blower.
Or...is this just...naturally...Air blowing through? But then..DC Main switch off...no air..
You do not have the required permissions to view the files attached to this post.
User avatar
AaHubb
Commander
Commander
Posts: 315
Joined: February 16th, 2013, 5:46 pm
Vessel Info: '99 404 CPMY
my twin diesel pusher
Location: Kennewick, Wa
Has thanked: 15 times
Been thanked: 61 times

Re: Vent...exhaust questions...

Post by AaHubb »

My 404 has a similar exhaust vent. Its to vent the forward head, look for a switch there.
..Aaron
'99 404 CPMY
SeaDragon
Viper
CYO Supporter
CYO Supporter
Posts: 6266
Joined: July 10th, 2015, 9:58 pm
Vessel Info: 1989 Carver 3807 Aft Cabin
Location: Ontario, Canada
Has thanked: 475 times
Been thanked: 1791 times

Re: Vent...exhaust questions...

Post by Viper »

Ya I'm thinking the same thing
User avatar
g36
Admiral
Admiral
Posts: 2115
Joined: April 7th, 2014, 6:07 pm
Vessel Info: 1997 Carver 405
Location: Soddy Daisy TN.
Has thanked: 7 times
Been thanked: 654 times

Re: Vent...exhaust questions...

Post by g36 »

Blower vent for head
1997 Carver 405
Crusader xli
The Black Pearl
Soddy Daisy Tn.
User avatar
benica
Scurvy Dog
Scurvy Dog
Posts: 36
Joined: September 8th, 2022, 6:08 am
Vessel Info: 1997 355 Aft cabin. 7.4 engines.
Has thanked: 1 time
Been thanked: 9 times

Re: Vent...exhaust questions...

Post by benica »

Yep! Thank you. Hired a tech...came out...he was stumped. Finally turned off each breaker and got it sorted.
While he was here....aft Bilge pump replaced. Still didn't work...he replaced the switch...still didn't work. At the helm...turn the aft Bilge on....works. At the actual pump in the aft cabin...lift the Bilge pump switch...doesn't come on...tech says....not sure...going to have to diagnose and could take hours...tech left for an emergency repair...
User avatar
km1125
Admiral
Admiral
Posts: 3658
Joined: February 28th, 2017, 6:04 pm
Has thanked: 81 times
Been thanked: 1114 times

Re: Vent...exhaust questions...

Post by km1125 »

benica wrote:QR_BBPOST Yep! Thank you. Hired a tech...came out...he was stumped. Finally turned off each breaker and got it sorted.
While he was here....aft Bilge pump replaced. Still didn't work...he replaced the switch...still didn't work. At the helm...turn the aft Bilge on....works. At the actual pump in the aft cabin...lift the Bilge pump switch...doesn't come on...tech says....not sure...going to have to diagnose and could take hours...tech left for an emergency repair...
There should be a separate breaker (perhaps located near you main DC power switches) that supplies power to the float switch and then to the bilge pump. This circuit would bypass the main DC power switch so the bilge pump gets power from a battery regardless if the main switch is on or off.
User avatar
benica
Scurvy Dog
Scurvy Dog
Posts: 36
Joined: September 8th, 2022, 6:08 am
Vessel Info: 1997 355 Aft cabin. 7.4 engines.
Has thanked: 1 time
Been thanked: 9 times

Re: Vent...exhaust questions...

Post by benica »

Appreciate the words. Looking into it.
Viper
CYO Supporter
CYO Supporter
Posts: 6266
Joined: July 10th, 2015, 9:58 pm
Vessel Info: 1989 Carver 3807 Aft Cabin
Location: Ontario, Canada
Has thanked: 475 times
Been thanked: 1791 times

Re: Vent...exhaust questions...

Post by Viper »

Aren't the breakers for the bilge pumps under the cabin step with the battery selector switch, charge breakers, etc.?
User avatar
benica
Scurvy Dog
Scurvy Dog
Posts: 36
Joined: September 8th, 2022, 6:08 am
Vessel Info: 1997 355 Aft cabin. 7.4 engines.
Has thanked: 1 time
Been thanked: 9 times

Re: Vent...exhaust questions...

Post by benica »

You are correct!!
Looked and looked again at the breaker...aft pump switch was tripped.
Thank you! Thank you!
:worthy:
You do not have the required permissions to view the files attached to this post.
Viper
CYO Supporter
CYO Supporter
Posts: 6266
Joined: July 10th, 2015, 9:58 pm
Vessel Info: 1989 Carver 3807 Aft Cabin
Location: Ontario, Canada
Has thanked: 475 times
Been thanked: 1791 times

Re: Vent...exhaust questions...

Post by Viper »

:down:
Wow, your tech couldn't figure that out?!!
Post Reply