Sometimes our engine won't turn over - no power getting to the starter. I think we've determined it's a faulty relay. I'm looking for a replacement, but getting the exact part number is impossible. How important is getting that number bang on, and what do the numbers mean? Pic attached.
Relay switch
-
MarkMaunder
- Scurvy Dog
- Posts: 11
- Joined: August 22nd, 2020, 4:00 pm
- Vessel Info: 1990 Carver 27 Santego
Volvo Penta 740
Duo-prop - Location: Fifty Point Marina - Grimsby ON Canada
- Has thanked: 5 times
-
km1125
- Admiral
- Posts: 3658
- Joined: February 28th, 2017, 6:04 pm
- Has thanked: 81 times
- Been thanked: 1114 times
Re: Relay switch
The "332014 150" would be the BOSCH part number. It's a 12V relay capable of 30 Amps.
You can probably use a bunch of similar relays in it's place, if you can't find an exact replacement. There are more numbers on the side that show the contacts, but I can't read them from that pic. The big difference in a replacement might mean the mounting method. Looks like the mounting tab is broken off yours.
You can probably use a bunch of similar relays in it's place, if you can't find an exact replacement. There are more numbers on the side that show the contacts, but I can't read them from that pic. The big difference in a replacement might mean the mounting method. Looks like the mounting tab is broken off yours.
-
plittle2005
- Deck Hand
- Posts: 97
- Joined: September 28th, 2020, 3:04 pm
- Vessel Info: 1992 Carver 350 Aft Cabin
- Location: Weehawken NJ
- Has thanked: 16 times
- Been thanked: 37 times
-
Viper
- CYO Supporter
- Posts: 6266
- Joined: July 10th, 2015, 9:58 pm
- Vessel Info: 1989 Carver 3807 Aft Cabin
- Location: Ontario, Canada
- Has thanked: 475 times
- Been thanked: 1791 times
Re: Relay switch
Those are common relays but you'll need to check if it's a 4 or 5 pin and make sure you get a 30 amp one. Post the engine serial number
-
MarkMaunder
- Scurvy Dog
- Posts: 11
- Joined: August 22nd, 2020, 4:00 pm
- Vessel Info: 1990 Carver 27 Santego
Volvo Penta 740
Duo-prop - Location: Fifty Point Marina - Grimsby ON Canada
- Has thanked: 5 times
Re: Relay switch
The numbers on the side are just a schematic I believe. (pic attached)km1125 wrote:QR_BBPOST The "332014 150" would be the BOSCH part number. It's a 12V relay capable of 30 Amps.
You can probably use a bunch of similar relays in it's place, if you can't find an exact replacement. There are more numbers on the side that show the contacts, but I can't read them from that pic. The big difference in a replacement might mean the mounting method. Looks like the mounting tab is broken off yours.
You do not have the required permissions to view the files attached to this post.
-
MarkMaunder
- Scurvy Dog
- Posts: 11
- Joined: August 22nd, 2020, 4:00 pm
- Vessel Info: 1990 Carver 27 Santego
Volvo Penta 740
Duo-prop - Location: Fifty Point Marina - Grimsby ON Canada
- Has thanked: 5 times
-
MarkMaunder
- Scurvy Dog
- Posts: 11
- Joined: August 22nd, 2020, 4:00 pm
- Vessel Info: 1990 Carver 27 Santego
Volvo Penta 740
Duo-prop - Location: Fifty Point Marina - Grimsby ON Canada
- Has thanked: 5 times
Re: Relay switch
Good thought, but that was replaced last year. Although I am going to get another as a backup and to eliminate that possibility if it's not the relay.plittle2005 wrote:QR_BBPOST Also check the key switch itself, they can fail.
-
bud37
- Admiral
- Posts: 5182
- Joined: April 23rd, 2015, 10:22 pm
- Has thanked: 604 times
- Been thanked: 1312 times
Re: Relay switch
Have you checked power to the relay when it fails ?
FWIW.....The above is just my opinion.
-
MarkMaunder
- Scurvy Dog
- Posts: 11
- Joined: August 22nd, 2020, 4:00 pm
- Vessel Info: 1990 Carver 27 Santego
Volvo Penta 740
Duo-prop - Location: Fifty Point Marina - Grimsby ON Canada
- Has thanked: 5 times
-
MarkMaunder
- Scurvy Dog
- Posts: 11
- Joined: August 22nd, 2020, 4:00 pm
- Vessel Info: 1990 Carver 27 Santego
Volvo Penta 740
Duo-prop - Location: Fifty Point Marina - Grimsby ON Canada
- Has thanked: 5 times
Sponsors