Hi Folks,
I was returning home from a weekend trip yesterday, when all of a sudden alarms started going off, so I throttled down to find out what was going on. I saw that both oil pressure gauges showed almost no oil pressure, so I shut down the engines. After checking the oil levels, which were good, and visually inspecting the engines, I decided to start them and see if the issue would continue. I fired them up and the oil pressure gauges read normal. I got up to cruising speed and had a pleasant cruise home. I'm thinking that there was a malfunction of the controller for the gauges, or some kind of short. Any have any ideas or have had a similar issue?
Thanks,
Chuck
1999 326 MY
Oil pressure gauge malfunction?
-
chdugan
- Scurvy Dog
- Posts: 3
- Joined: July 22nd, 2019, 1:54 pm
- Vessel Info: 1999 Carver 350 Mariner with twin 350 Mag engines
- Location: Chesapeake Bay
-
Viper
- CYO Supporter
- Posts: 6266
- Joined: July 10th, 2015, 9:58 pm
- Vessel Info: 1989 Carver 3807 Aft Cabin
- Location: Ontario, Canada
- Has thanked: 475 times
- Been thanked: 1791 times
Sponsors