I've a failed piston on the port engine, #4 cylinder in my 2005 CMY41. The authorized V-P mechanic is telling me that in order to access and repair the engine, the bridge will need to be removed or an access hole cut into the side of the boat. Carver is telling me that if the engine is stripped to the block, then the engine can be removed thru the salon door onto the aft deck. This is not a job I trust with the hands at our marina.

I'm in the Orlando area. Does anyone have a recommendation for a source to remove the engine and then replace it after repairs? And, does this solution even seem feasible? My concern is that I don't want to cause more harm by doing something as drastic as removing and replacing the bridge or cutting a large hole in the side of the boat.

Any advice is much appreciated.