Carver 356 RPM issues

GAS engine, transmission and generator repair and maintenance discussion forum.
Post Reply
User avatar
cpoint
Commander
Commander
Posts: 453
Joined: April 20th, 2016, 1:00 pm
Vessel Info: 2000 Carver 356 aft cabin
Has thanked: 208 times
Been thanked: 32 times

Re: Carver 356 RPM issues

Post by cpoint »

km, not sure. how do I check Smartcraft capable? I did not see any reference on any documentation, etc.
User avatar
g36
Admiral
Admiral
Posts: 2115
Joined: April 7th, 2014, 6:07 pm
Vessel Info: 1997 Carver 405
Location: Soddy Daisy TN.
Has thanked: 7 times
Been thanked: 654 times

Re: Carver 356 RPM issues

Post by g36 »

Smartcraft is a mercruiser engines product.
1997 Carver 405
Crusader xli
The Black Pearl
Soddy Daisy Tn.
User avatar
bud37
Admiral
Admiral
Posts: 5184
Joined: April 23rd, 2015, 10:22 pm
Has thanked: 604 times
Been thanked: 1312 times

Re: Carver 356 RPM issues

Post by bud37 »

I am willing to hazard a guess here and say his engine controllers are Delphi MEFI 3, no bus to helm. Merc didn't go to their own 555 ecu till maybe around 02/03.
FWIW.....The above is just my opinion.
User avatar
km1125
Admiral
Admiral
Posts: 3658
Joined: February 28th, 2017, 6:04 pm
Has thanked: 81 times
Been thanked: 1114 times

Re: Carver 356 RPM issues

Post by km1125 »

I know it's in the very early 2000's, but not sure on the specific year they made them capable. I thought all their product line was capable after 2002, but some were before that.

In any case, tachs themselves are pretty inexpensive, so finding ones that look good (or that match what you want to upgrade the other to) might be the hardest part.
User avatar
km1125
Admiral
Admiral
Posts: 3658
Joined: February 28th, 2017, 6:04 pm
Has thanked: 81 times
Been thanked: 1114 times

Re: Carver 356 RPM issues

Post by km1125 »

g36 wrote:Qr Bbpost Smartcraft is a mercruiser engines product.


I thought he did have Mercruisers in the boat?

However, checking the Smartcraft sites, it seems like his 2000 is just a tad too old to have it:

"The SmartCraft line of products are applicable to all Mercury/Mariner OptiMax outboard engines starting with Model 2000, and all MerCruiser 8.1 liter engines for Model Year 2001."
User avatar
tomschauer
Admiral
Admiral
Posts: 2323
Joined: March 28th, 2016, 10:52 pm
Vessel Info: 1998 Carver 355
Suspicious Fishes !
2022 Kawasaki 310X
Location: upper chesapeake bay
Has thanked: 326 times
Been thanked: 602 times

Re: Carver 356 RPM issues

Post by tomschauer »

I had a 2005 Crownline with merc 5.7 magnums, and the ecms were not smart craft capable. I think it was an option for most engines until 20XX?
User avatar
cpoint
Commander
Commander
Posts: 453
Joined: April 20th, 2016, 1:00 pm
Vessel Info: 2000 Carver 356 aft cabin
Has thanked: 208 times
Been thanked: 32 times

Re: Carver 356 RPM issues

Post by cpoint »

Yeah not sure, I am at a loss on this one. Here is a picture of port engine for what it's worth.
You do not have the required permissions to view the files attached to this post.
User avatar
tomschauer
Admiral
Admiral
Posts: 2323
Joined: March 28th, 2016, 10:52 pm
Vessel Info: 1998 Carver 355
Suspicious Fishes !
2022 Kawasaki 310X
Location: upper chesapeake bay
Has thanked: 326 times
Been thanked: 602 times

Re: Carver 356 RPM issues

Post by tomschauer »

They aren't smartcraft engines.
Close to the same as mine, but mine are blue water horizons (freshwater cooled). I would replace the tachs until you get the engines running correctly.
I would definitely verify the fuel pressure is correct. These have a mercury "cool fuel" set up with the fuel pump and regulator in a box under the engine that is water cooled. The regulators fail more often than the pumps. They sometimes fail to high pressure, making you engines run very rich (smell like gas) this will also damage the injectors.
User avatar
tomschauer
Admiral
Admiral
Posts: 2323
Joined: March 28th, 2016, 10:52 pm
Vessel Info: 1998 Carver 355
Suspicious Fishes !
2022 Kawasaki 310X
Location: upper chesapeake bay
Has thanked: 326 times
Been thanked: 602 times

Re: Carver 356 RPM issues

Post by tomschauer »

Hey, I almost forgot...
There is a very fine fuel filter in the cool fuel box. It could be that simple!!!!
User avatar
cpoint
Commander
Commander
Posts: 453
Joined: April 20th, 2016, 1:00 pm
Vessel Info: 2000 Carver 356 aft cabin
Has thanked: 208 times
Been thanked: 32 times

Re: Carver 356 RPM issues

Post by cpoint »

tomschauer wrote:Qr Bbpost Hey, I almost forgot...
There is a very fine fuel filter in the cool fuel box. It could be that simple!!!!

tom, do you mean this tiny filter? if so that did have some stuff in it. he thought he would clean and hope also, but did not help.
You do not have the required permissions to view the files attached to this post.
Post Reply