Our C37 just got finished with Seadek install

Hello,
New owner of 2000 456 carver located on georgian bay , Ontario canada.

Appreciate the opportunity to learn from this site.

Thank-you

Hello all,

2004 360 SS HVAC has no problems heating or cooling, but the vent on the ceiling above the dining table doesn’t blow any air out of it. All of the other ones do. Well maybe that’s good so food doesn’t get cold too fast?

Wondering if anyone knows of an exact replacement for this hatch. It leaks badly and dogs are broken off. It appears to be plastic. Hole opening is approx 19 7/16” x 19 7/16. It has 2 cross bars under the lexan. 1 running fore and aft and the other running port and stbd. Thanks

Good afternoon all. I have been posting about my Cummins QSM11 engines not reaching full RPM. Specifically on the starboard side. I have had Cummins techs replace the starboard ECM and verified the engines are in good shape. This weekend I had a very strange incident. While starting the engines, after pressing the button on the throttle control, I tried to start the port engine first. When I turned the port key, the starboard engine started then the port started when I turned the starboard key. ...

Looking to put in a new toilet

we don't use it much as there are restroom on 30 yards from our slip

Any advice...heres what we have been looking at...both electric with a macerator

Jabsco
https://www.amazon.com/gp/product/B000O ... QHKP&psc=1

TMC
https://www.amazon.com/gp/product/B00AY ... WPUI&psc=1

Thanks

I've owned my 1997 Carver 440 for 3 years now and only recently I started having issues with the generator. It's a Kohler generator. It has 1,700 hours on it and I have everything serviced annually. We are on a fresh water lake in Texas.



My generator has done a great job since I've owned the boat. In the past month, I've had issues with it shutting down. It will run for 30 minutes and then it will cut off. I've checked the breaker for the generator, down in the aft cabin closet, and it was ...

I'd like to put in a 3000w inverter (Can Tire sine). This boat has Cummins diesels in it so mounting this inverter in

the engine room shouldn't be a problem (spark arrestor??).



Trouble is that I cannot find a way from the TV/AC area on the starboard side down to the engine room. I can

see wiring and hoses but no apparent opening in the engine room. Fuel tanks and shaft is in the way from me

really getting in there but I'll figure out a way.



Anyone know of a way to the engine room for 4 4gage cab ...

I posted last year about trying to find the leak in my (Riviera) water system. I took another stab at it this weekend and found the problem. now I need to find the solution. The pics below show the tank (could not identify the brand), the problem valve, and the faulty piece that I presume is meant to prevent water from spurting out the valve at the base of the tank. I do not understand how the plumbing is supposed to work, nor what the function of this valve is, but what was hapening is the blac ...

1986 3607 aft cabin
Does anyone know the height with the bridge canvas removed? I need to get the height to get a shipping quote for a boat that I am considering purchasing