Hello All,
I am preparing to change all the hoses to the aft waste system in my 2004 396. Two of the long hoses in the system (toilet to vacuum pump, and pumpout line) connect to PVC pipes way down in the bilge. About the only way I can see to access those fittings is to remove the port muffler. Anyone have any tricks or suggestions to avoid that big job? If I remove the cabinet next to the bed, would that give me some access?
Thanks for any suggestions.
Thatchh

Hello looking for some help! I’m looking for the window seal for my 1992 330 aft cabin. It’s the aft cabin escape window, it was manufactured by Taylor. I have contacted carver and Taylor no luck with them. I would like to get a replacement seal if possible or a replacement window the dimensions are 271/2 wide by 161/2 tall that is the outside dimensions. I have added some photos for a better understanding of what I need. ...

Any one know where I can buy a replacement exhaust flapper for my '89 Carver 3607?

My boat ,a 1980 3326 Voyager. Is in need of the steering wheel and hydraulic hookup for the lower station. Everything else is there but no steering wheel.I

Anyone know of boat salvage yards in Western Lake Erie area? Maybe I can locate a 1980's Carver.

I am having an estimate done from a person to do the buff/wax job on my Mariner. Her quote will be done Friday. What do you all think would be a reasonable expense? She does a 2 or 3 step process, compounding/wax, and I have seen some boats she did. They look really nice, but they are a different brand. I usually have a pro job done every other year, and do off years myself with a one step cleaner/wax. Any input? What do you pay on the 32 -33 foot range? Thanks for the input!

er

This has always been a pita to say the least. In my case the hose is permanently connected to city water which gets detached from the boat and left at the dock when out cruising. I always shut the valve off when leaving the boat for the week other wise it is always on when we are at the boat or even away for a few hours running errands. that being said these cheap "RV/Marine" hoses tend to swell to the point of looking like they will explode. So I searched to find the best alternative.

I should m ...

28 ft voyager, twin 230 gas, 4 - house gel 6 V. batteries w/ inverter

I'm getting intermediate reading of 10.5 V on "bridge" circiut. It Runs VHF radio, 1040SX gps & radar. I have 12.2 @ control panel switch w/ engines off and 99% SOC on house system. Where could my two volts go?

All of a sudden the gas fumes on my boat have become extremely noticable and unbearable and a serious fire hazard.

It currently has maybe 10 gallons in each tank and I believe the problem is coming from my fuel filler hoses and vent hoses based upon what I have read in thusforum and others.

I've also been told that changing them out is a fairly easy task that can be done myself.

Does anyone know if there are any step by step DIY directions or videos of photographs showing this being done or can ...

Need member from Portland Oregon and have a 94 37 Carver Aft Cabin with twin gas engines with a direct pipeline to my wallet is

A beautiful day so we took the fishing boat out for the yearly cruise around ??? Some of you from the area may know.......